|
BWR-15-670-D12A Datasheet, PDF (1/6 Pages) Murata Manufacturing Co., Ltd. – 15-20W, Dual Output DC/DC Converters | |||
|
www.murata-ps.com
BWR Models
15-20W, Dual Output DC/DC Converters
FEATURES
ï®ï Low cost! Highly reliable!
ï®ï Proven SMT-on-pcb construction
ï®ï Qual tested; HALT tested; EMC tested
ï®ï Designed to meet UL/ EN60950-1,
BASIC insulation (48VIN models)
ï®ï mark available (48VIN models)
ï®ï Output voltages: ±5, ±12 or ±15 Volts
ï®ï Ultra-wide input voltage ranges:
4.7-7.5V, 9-36V or 18-75V
ï®ï Small packages, 2" x 2" x 0.45"
ï®ï Industry-standard pinouts
ï®ï Fully isolated, 1500Vdc guaranteed
ï®ï Guaranteed efï¬ciencies to 82%
ï®ï â40 to +100°C operating temperature
ï®ï Modiï¬cations and customs for OEMâs
+VIN
(1)
PRODUCT OVERVIEW
For your mid-range power requirements, itâs hard to beat the combination of low cost, proven
reliability and outstanding electrical performance offered by the
15-20W, dual-output models of MPSâs new A-Series DC/DC converters. These highly efï¬cient, rugged
converters combine straightforward circuit topologies, the newest components, proven SMT-on-
pcb construction methods, and highly repeatable automatic-assembly techniques. Their superior
durability is substantiated by a rigorous in-house qualiï¬cation program that includes HALT (Highly
Accelerated Life Testing).
The ultra-wide input voltage ranges of the A-Series duals (4.7-7.5V for "D5A" models, 9-36V
for "D12A" models and 18-75V for "D48A" models) make them excellent candidates for battery-
powered systems or for distributed power architectures. Their ±5, ±12 or ±15 Volt outputs cover
virtually all standard applications.
These popular power converters are fully isolated (1500Vdc guaranteed) and display excellent
line and load regulation (with specs as low as ±0.3% max. for line and ±0.5% max. for load). They
are completely I/O protected (input overvoltage shutdown and reverse-polarity protection, output
current limiting and overvoltage protection) and contain input (pi type) and output ï¬ltering to reduce
noise. They require no external components and offer true "plug-and-play" convenience.
These extremely reliable, cost-effective power converters are housed in standard 2" x 2" x
0.45" metal packages coated with electrically non-conductive materials. They offer industry-stan-
dard pinouts and are ideally suited for high-volume computer, telecom/datacom, instrumentation and
ATE applications.
+VOUT
(5)
COMMON
(6)
âVIN
(2)
ON/OFF
CONTROL
(4)
Ḥ
For full details go to
www.murata-ps.com/rohs
PWM
CONTROLLER
OPTO
ISOLATION
Figure 1. Simpliï¬ed Schematic
www.murata-ps.com/support
REFERENCE &
ERROR AMP
âVOUT
(7)
TRIM
(8)
Typical topology is shown.
MDC_BWR15_20_B05 Page 1 of 6
|
▷ |