BNX022-01L Datasheet, PDF (1/2 Pages) Murata Manufacturing Co., Ltd. – Block Type EMIFILr LC Combined Type

Noise Suppression Products/EMI Suppression Filters > Block Type EMIFILr LC Combined Type
Data Sheet
1
Block Type EMIFILr LC Combined Type
BNX02* Series
I Dimensions
(1)
(3)
12.1±0.2
(2)
BNX022 (4)
(1) (3)
(4)
7.0±0.2 1.55±0.2
(4) (2)
(3)
(4)
(1)
(2)
1.0±0.3
2.5±0.2 1.55±0.2
(4)
: Electrode
(in mm)
I Equivalent Circuit
L1
(1) B
L2
(3) PSG
L3
C2
C1
CB (2)
CG (4)
(1)-(4): Terminal Number
PSG: Power Supply Ground
CG: Circuit Ground
CB: Circuit+B
I Insertion Loss Characteristics
0
20
BNX022-01
BNX023-01
40
60
80
100
0.1
0.5 1
5 10
50 100
Frequency (MHz)
500 1000
I Packaging
Code
Packaging
L
180mm Embossed Tape
K
330mm Embossed Tape
B
Bulk(Bag)
Minimum Quantity
400
1500
100
I Rated Value (p: packaging code)
Part Number Rated Voltage Withstand Voltage Rated Current Insulation Resistance(min.)
BNX022-01p 50Vdc
125Vdc
10A
500M ohm
BNX023-01p 100Vdc
250Vdc
15A
500M ohm
Operating Temperature Range: -40°C to 125°C
In operating temperatures exceeding +85°C, derating of current is necessary.
Insertion Loss
1MHz to 1GHz:35dB min. (20 to 25 degrees C line impedance=50 ohm)
1MHz to 1GHz:35dB min. (20 to 25 degrees C line impedance=50 ohm)
Continued on the following page.
o This data sheet is applied for Block Type EMIFILr used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2009.1.8
http://www.murata.com/