BNX012-01 Datasheet, PDF (1/2 Pages) Murata Manufacturing Co., Ltd. – Block Type EMIFILr LC Combined Type

Noise Suppression Products/EMI Suppression Filters > Block Type EMIFILr LC Combined Type
Data Sheet
1
Block Type EMIFILr LC Combined Type
BNX01* Series
I Dimensions
12.0±0.2
BNX***
11.0±0.2
0.8
±0.1
0.8
±0.1
ø0.8
±0.1
7.5±0.2
*** : 012/016
2.5±0.2
ø0.8
±0.1
0.6
±0.1
2.5±0.2
PSG: Power supply ground
CB
CG: Load circuit ground
CG
CB: Load circuit + Bias
CG
PSG
B
(in mm)
I Equivalent Circuit
L1
(1) B
L2
(3) PSG
L3
C2
C1
CB (2)
CG (4)
(1)-(4): Terminal Number
PSG: Power Supply Ground
CG: Circuit Ground
CB: Circuit+B
I Insertion Loss Characteristics
0
10
20
30
40
BNX012-01
50
60 ^BNX016-01
70
80
90
0.001
0.01
0.1
1
10
Frequency (MHz)
(50Ω - 50Ω)
100
1000
I Packaging
Code
-
Packaging
Box
Minimum Quantity
150
I Rated Value
Part Number Rated Voltage Withstand Voltage Rated Current Insulation Resistance(min.)
Insertion Loss
BNX012-01
50Vdc
125Vdc
15A
500M ohm
BNX016-01
25Vdc
62.5Vdc
15A
50M ohm
Operating Temperature Range: -40°C to 125°C
In operating temperatures exceeding +85°C, derating of current is necessary.
1MHz to 1GHz:40dB min. (20 to 25 degrees C line impedance=50 ohm)
100kHz to 1GHz:40dB min. (20 to 25 degrees C line impedance=50 ohm)
Continued on the following page.
o This data sheet is applied for Block Type EMIFILr used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2009.1.8
http://www.murata.com/