BLM18PG300SN1D Datasheet, PDF (1/4 Pages) Murata Manufacturing Co., Ltd. – EMIFIL (Inductor type) Chip Ferrite Bead BLM18P Series (0603 Size)

Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead
Data Sheet
1
EMIFILr (Inductor type) Chip Ferrite Bead
BLM18P Series (0603 Size)
c Dimensions
c Equivalent Circuit
0.4±0.2
1.6±0.15
0.8±0.15
: Electrode
(in mm)
c Packaging
Code
Packaging
D
180mm Paper Tape
J
330mm Paper Tape
B
Bulk(Bag)
Minimum Quantity
4000
10000
1000
c Rated Value (p: packaging code)
Part Number
Impedance
(at 100MHz/20°C)
BLM18PG300SN1p
BLM18PG330SN1p
BLM18PG600SN1p
BLM18PG121SN1p
BLM18PG181SN1p
BLM18PG221SN1p
BLM18PG331SN1p
BLM18PG471SN1p
Number of Circuits: 1
30ohm (Typ.)
33ohm ±25%
60ohm (Typ.)
120ohm ±25%
180ohm ±25%
220ohm ±25%
330ohm ±25%
470ohm ±25%
Impedance
(at 1GHz/20°C)
-
-
-
-
-
-
-
-
(Resistance element becomes dominant
at high frequencies.)
Rated Current
1000mA
3000mA
500mA
2000mA
1500mA
1400mA
1200mA
1000mA
DC Resistance
0.05ohm max.
0.025ohm max.
0.10ohm max.
0.05ohm max.
0.09ohm max.
0.10ohm max.
0.15ohm max.
0.20ohm max.
Operating
Temperature Range
-55 to +125°C
-55 to +125°C
-55 to +125°C
-55 to +125°C
-55 to +125°C
-55 to +125°C
-55 to +125°C
-55 to +125°C
Continued on the following page.
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.1.10
http://www.murata.com/