BLM18GG471SN1D Datasheet, PDF (1/2 Pages) Murata Manufacturing Co., Ltd. – EMIFIL (Inductor type) Chip Ferrite Bead for High-GHz Noise BLM18G Series (0603 Size)

Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead for High-GHz Noise
Data Sheet
1
EMIFILr (Inductor type) Chip Ferrite Bead for High-GHz Noise
BLM18G Series (0603 Size)
I Dimensions
0.35±0.15
I Equivalent Circuit
1.6±0.1
0.8±0.1
(Resistance element becomes dominant
at high frequencies.)
: Electrode
(in mm)
I Packaging
Code
Packaging
D
180mm Paper Tape
J
330mm Paper Tape
B
Bulk(Bag)
Minimum Quantity
4000
10000
1000
I Rated Value (p: packaging code)
Part Number
BLM18GG471SN1p
Number of Circuits: 1
Impedance
(at 100MHz/20°C)
470ohm±25%
Impedance
(at 1GHz/20°C)
1800ohm±30%
Rated Current
200mA
DC Resistance
1.0ohm ±0.3ohm
Operating
Temperature Range
-55 to +125°C
I Impedance-Frequency Characteristics (Main Items)
2000
1500
1000
500
BLM18GG471SN1
0
1
10
100
1000 3000
Frequency (MHz)
I Impedance-Frequency Characteristics
BLM18GG471SN1
2000
1500
1000
500
0
1
Z
R
10
100
Frequency (MHz)
X
1000 3000
Continued on the following page.
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.3.3
http://www.murata.com/