BLM15HG601SN1 Datasheet, PDF (1/3 Pages) Murata Manufacturing Co., Ltd. – EMIFIL (Inductor type) Chip Ferrite Bead for GHz Noise

Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead for GHz Noise
Data Sheet
1
EMIFILr (Inductor type) Chip Ferrite Bead for GHz Noise
BLM15H Series (0402 Size)
c Dimensions
0.25±0.1
c Equivalent Circuit
1.0±0.05
0.5±0.05
: Electrode
(in mm)
c Packaging
Code
Packaging
D
180mm Paper Tape
J
330mm Paper Tape
B
Bulk(Bag)
Minimum Quantity
10000
50000
1000
c Rated Value (p: packaging code)
Part Number
Impedance
(at 100MHz/20°C)
BLM15HG601SN1p
BLM15HG102SN1p
BLM15HD601SN1p
BLM15HD102SN1p
BLM15HD182SN1p
BLM15HB121SN1p
BLM15HB221SN1p
Number of Circuits: 1
600ohm ±25%
1000ohm ±25%
600ohm ±25%
1000ohm ±25%
1800ohm ±25%
120ohm ±25%
220ohm ±25%
Impedance
(at 1GHz/20°C)
1000ohm ±40%
1400ohm ±40%
1400ohm ±40%
2000ohm ±40%
2700ohm ±40%
500ohm ±40%
900ohm ±40%
(Resistance element becomes dominant
at high frequencies.)
Rated Current
300mA
250mA
300mA
250mA
200mA
300mA
250mA
DC Resistance
0.7ohm max.
1.1ohm max.
0.85ohm max.
1.25ohm max.
2.2ohm max.
0.7ohm max.
1.0ohm max.
Operating
Temperature Range
-55 to +125°C
-55 to +125°C
-55 to +125°C
-55 to +125°C
-55 to +125°C
-55 to +125°C
-55 to +125°C
Continued on the following page.
oThis data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
!Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it
may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2012.9.6
http://www.murata.com/