BLA31AG300SN4D Datasheet, PDF (1/4 Pages) Murata Manufacturing Co., Ltd. – EMIFIL (Inductor type) Chip Ferrite Bead (Array) BLA31A/BLA31B Series (1206 Size)

Noise Suppression Products/EMI Suppression Filters > EMIFILr (Inductor type) > Chip Ferrite Bead (Array)
Data Sheet
1
EMIFILr (Inductor type) Chip Ferrite Bead (Array)
BLA31A/BLA31B Series (1206 Size)
I Dimensions
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
I Equivalent Circuit
(1)
(2)
(3)
(4)
0.4±0.2
0.8±0.1
3.2±0.2
: Electrode
(in mm)
(5)
(6)
(7)
(8)
No polarity.
I Packaging
Code
Packaging
D
180mm Paper Tape
J
330mm Paper Tape
B
Bulk(Bag)
Minimum Quantity
4000
10000
1000
I Rated Value (p: packaging code)
Part Number
BLA31AG300SN4p
BLA31AG600SN4p
BLA31AG121SN4p
BLA31AG221SN4p
BLA31AG601SN4p
BLA31AG102SN4p
BLA31BD121SN4p
BLA31BD221SN4p
BLA31BD471SN4p
BLA31BD601SN4p
BLA31BD102SN4p
Number of Circuits: 4
Impedance
(at 100MHz/20°C)
30ohm ±25%
60ohm ±25%
120ohm ±25%
220ohm ±25%
600ohm ±25%
1000ohm ±25%
120ohm ±25%
220ohm ±25%
470ohm ±25%
600ohm ±25%
1000ohm ±25%
Impedance
(at 1GHz/20°C)
-
-
-
-
-
-
-
-
-
-
-
Rated Current
200mA
200mA
150mA
150mA
100mA
50mA
150mA
150mA
100mA
100mA
50mA
DC Resistance
0.10ohm max.
0.15ohm max.
0.20ohm max.
0.25ohm max.
0.35ohm max.
0.45ohm max.
0.30ohm max.
0.35ohm max.
0.40ohm max.
0.45ohm max.
0.55ohm max.
Operating
Temperature Range
-55 to +125°C
-55 to +125°C
-55 to +125°C
-55 to +125°C
-55 to +125°C
-55 to +125°C
-55 to +125°C
-55 to +125°C
-55 to +125°C
-55 to +125°C
-55 to +125°C
Continued on the following page.
o This data sheet is applied for CHIP FERRITE BEAD used for General Electronics equipment for your design.
! Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2011.7.7
http://www.murata.com/