|
BEI15_11 Datasheet, PDF (1/13 Pages) Murata Manufacturing Co., Ltd. – Isolated Wide Input Bipolar 15-Watt DC/DC Converters | |||
|
www.murata-ps.com
BEI15 Series
Isolated Wide Input Bipolar 15-Watt DC/DC Converters
Typical unit
FEATURES
 Small footprint DC/DC converter, ideal for
high current applications
 Industry standard 0.96" x 1.1" X 0.35"
open frame package and pinout
 Wide range input voltages 9-36 and
18-75 Vdc
 Bipolar ±5V, ±12V and ±15V outputs
 Up to 15 Watts or greater total output
power with overtemperature shutdown
 Isolation up to 2250 VDC (basic), Q48 models
 High efï¬ciency synchronous rectiï¬er
forward topology
 Usable -40 to 85°C temperature range
(with derating)
 Assembly and attachment for RoHS standards
 Extensive self-protection shut down
features
 Meets UL 60950-1, CAN/CSA-
C22.2 No. 60950-1, IEC60950-1,
EN60950-1 safety approvals (2nd Edition)
CONNECTION DIAGRAM
F1
+Vin (1)
External
DC
Power
Source
On/Off
Control
(3)
Open = On
$MPTFE0GG
1PTJUJWF
polarity)
-Vin (2)
Ḥ
For full details go to
www.murata-ps.com/rohs
PRODUCT OVERVIEW
Featuring a full 15 Watt output in one square
inch of board area, the BEI-15 series isolated DC/
DC converter family offers efï¬cient regulated DC
power for printed circuit board mounting. The
wide range 4:1 inputs on the 0.96" x 1.1" x 0.35"
(24.4 x 27.9 x 8.9 mm) converter are either 9 to 36
Volts DC (Q12 models) or 18 to 75 Volts DC (Q48
models), ideal for battery-powered and telecom
equipment. The industry-standard pinout ï¬ts larger
1" x 2" converters. Fixed output voltages of ±5,
±12 or ±15 VDC are regulated to within ±0.25%.
Applications include small instruments, area-
limited microcontrollers, data communications
equipment, remote sensor systems, vehicle and
portable electronics.
The BEI-15 series includes full magnetic
and optical isolation with Basic protection up to
2250 Volts DC (Q48 models) and 2000 VDC (Q12
models). For powering digital systems, the outputs
offer fast settling to step transients and will accept
higher capacitive loads. Excellent ripple and noise
speciï¬cations assure compatibility to noise-sus-
ceptible circuits. For systems requiring controlled
startup/shutdown, an external remote On/Off
control may use a switch, transistor or digital logic.
A wealth of self-protection features avoid both
converter and external circuit faults. These include
input undervoltage lockout and overtemperature
shutdown. The outputs current limit using the
âhiccupâ autorestart technique and the outputs
are short-circuit protected. Additional features
include output overvoltage and reverse conduction
elimination. The high efï¬ciency offers minimal heat
buildup and âno fanâ operation.
Contents
Page
Description, Photograph, Connection Diagram
1
Ordering Guide, Model Numbering, Soldering Guidelines
2
Mechanical Specs, Input/Output Pinout
3
Detailed Electrical Speciï¬cations
4
Application Notes
6
Performance Data
8
Controller
and
Power
5SBOTGFS
*TPMBUJPO
Barrier
t4XJUDIJOH
t'JMUFST
t4XJUDIJOH
t'JMUFST
Reference and
Error Ampliï¬er
+Vout (6)
Common (5)
-Vout (4)
Typical topology is shown.
Murata Power Solutions recommends a fuse at F1.
www.murata-ps.com
email: sales@murata-ps.com
18 Feb 2011 MDC_BEI15W.A04 Page 1 of 13
|
▷ |