MVAD065-48 Datasheet, PDF (5/7 Pages) Murata Power Solutions Inc. – 65W 2 x 4 AC-DC Power Supply Converter

MECHANICAL DIMENSIONS – MVAD065-05 ONLY
Φ0.156±0.05
4 Places
Maximum Screw Head DIAMETER
Maximum earth ground contact area
PCB top and bottom
DIAMETER Φ0.236" (6.0)
MVAD065 Series
65W 2" x 4" AC-DC Power Supply Converter
Output Voltage Adjust Pot
for Factory Use
※1 Preferred screw type
M3 (Metric screw threads)
No.4-40UNC (United thread Standard)
All dimensions in inches (mm). tolerance is +/-0.02’ (0.5)
Mounting holes H1 and H2 should be earth-grounded for EMI purpose
Mounting holes H2 is earth ground connection
This power supply requires mounting on standoffs minimum 0.2' (5.0) in height
Dimensions: 2.0" x 4.0" x 1.3" (50.8mm x 101.6mm x 33.02mm)
INPUT/OUTPUT CONNECTOR AND SIGNAL SPECIFICATION AND MATING CONNECTORS
PIN
Description
Mating Housing
Input Connector CN1 : Molex 26-62-4030
1
AC Line (V-)
Molex 09-50-8031 with locking ramp
3
AC Neutral (V+)
Spade Connector: #250
GND
Earth Ground
Output Connector CN2 : Molex 26-60-4060
1, 2
V1
3, 4
DC Return
Molex 09-50-8061 with locking ramp
5
-Remote Sense (NC)
6
+Remote Sense
Crimp terminal/pins
Molex 6838 Series
Molex 6838 Series
power.murata.com
MVAD065.B01  Page 5 of 7