MVAD160-12 Datasheet, PDF (4/6 Pages) Murata Manufacturing Co., Ltd. – 160W 2" X 4" AC-DC Power Supply Converter

MECHANICAL DIMENSIONS
Maximum earth ground contact area
PCB top and bottom
Diameter ĭ0.244”(ĭ6.2)
MVAD160 Series
160W 2" X 4" AC-DC Power Supply Converter
Mounting hole ͤ1
ĭ0.146”(ĭ3.7)
4 Places H1–H4
Max. screw head
Diameter ĭ0.244”(ĭ6.2)
ͤ1 Preferred screw type:
M3 (Metric screw threads)
VR
Output voltage and current Adjust Pots
for Factory Use
All dimensions in inches (mm). Tolerance is +/-0.02" (0.5)
Mounting holes H3 and H4 should be earth-grounded for EMI purpose.
Mounting holes H4 is earth ground connection
This power supply requires mounting on standoffs minimum 0.197" (5.0) in height for forced air cooling.
Dimensions: 2.0" x 4.0" x 1.5" (50.8mm x 101.6mm x 38.1mm)
INPUT/OUTPUT CONNECTOR AND SIGNAL SPECIFICATION AND MATING CONNECTORS
Pin
Description
Mating Housing
Input Connector CN1: TE Connectivity 5-1376382-1
1
Line (V-)
TE Connectivity 1376388-1
2
Neutral (V+)
Spade Connector: #250
GND
Earth Ground
Output Connector CN2: Molex 39-28-8040
1, 2
V1
Molex 39-01-2040
3, 4
V1 Return
Output Connector CN3: Molex 87438-0643
for models with auxiliary output
1
V2
2
V2 Return
3
V1 Remote
Molex 87439-0600
4
V1 -Sense
5
N.C
6
V1 +Sense
Crimp terminal/pins
TE Connectivity 1376348-1
Molex 39-00-0038
Molex 87421-0000
Outline
hptotwp:e/r/.pmouwreart.am.cuormata.com
MVAD160.A05 Page 4 of 6