MVAD065-24 Datasheet, PDF (3/7 Pages) Murata Power Solutions Inc. – 65W 2 x 4 AC-DC Power Supply Converter

MVAD065 Series
65W 2" x 4" AC-DC Power Supply Converter
EMI CONSIDERATIONS
For optimum EMI performance, the power supply should be mounted to a metal plate grounded to all 4 mounting holes of the power supply. To comply with
safety standards, this plate must be properly grounded to protective earth (see mechanical dimension notes). Pre-compliance testing has shown the stand-
alone power supply to comply with EN55022 class A radiated emissions. Radiated emission results vary with system enclosure and cable routing paths.
SAFETY CONSIDERATIONS
1. This power supply is a component level power supply intended for use in class I or class II applications. Secondary ground traces need to be suit-
ably isolated from primary ground traces when used in class II applications.
2. When the power supply is used in class II equipment, all ground traces and components connected to the primary side are considered primary for
spacing and insulation considerations.
3. Double pole/neutral fusing.
PERFORMANCE DATA
93
91
89
87
85
83
81
79
77
75
73
0.00
MVAD065-05 Efficiency (%)
90Vac
115Vac
230Vac
264Vac
2.00
4.00
6.00
8.00 10.00 12.00
Output Current (A)
95
93
91
89
87
85
83
81
79
77
75
0.00
MVAD065-12 Efficiency (%)
90Vac
115Vac
230Vac
264Vac
1.00
2.00
3.00
4.00
5.00
Output Current (A)
MVAD065-18 Efficiency (%)
95
93
91
89
87
85
83
90Vac
81
115Vac
79
230Vac
77
264Vac
75
0.00 0.50 1.00 1.50 2.00 2.50 3.00 3.50 4.00
Output Current (A)
MVAD065-24 Efficiency (%)
95
93
91
89
87
85
83
90Vac
81
115Vac
79
230Vac
77
264Vac
75
0.00
0.50
1.00
1.50
2.00
2.50
3.00
Output Current (A)
MVAD065-48 Efficiency (%)
95
93
91
89
87
85
83
90Vac
81
115Vac
79
230Vac
77
264Vac
75
0.00 0.20 0.40 0.60 0.80 1.00 1.20 1.40
Output Current (A)
power.murata.com
MVAD065.B01  Page 3 of 7