D1U2-W-400-12-HA4C Datasheet, PDF (3/6 Pages) Murata Power Solutions Inc. – 54mm 1U Front End AC-DC Power Supply Converter

D1U2-W-400-12-HA4C
54mm 1U Front End AC-DC Power Supply Converter
EMISSIONS AND IMMUNITY
Characteristic
Input Current Harmonics
Voltage Fluctuation and Flicker
Conducted Emissions
ESD Immunity
Radiated Field Immunity
Electrical Fast Transients/Burst Immunity
Surge Immunity
Radiated Field Conducted Immunity
Magnetic Field Immunity
Standard
IEC/EN 61000-3-2
IEC/EN 61000-3-3
FCC 47 CFR Part 15/CISPR 22/EN55022
IEC/EN 61000-4-2
IEC/EN 61000-4-3
IEC/EN 61000-4-4
IEC/EN 61000-4-5
IEC/EN 61000-4-6
IEC/EN 61000-4-8
Voltage dips, interruptions
IEC/EN 61000-4-11
Compliance
Complies
Complies
Class B
Level 3 criteria A
Level 3 criteria B
Level 3 criteria A
Level 3 criteria A
Level 3 criteria A
3 A/m criteria B
230Vin, 100% load, Phase 0°, Dip 100% Duration 10ms (A)
230Vin, 50% load, Phase 0°, Dip 100% Duration 20ms (VSB:A, V1:A)
230Vin, 100% load, Phase 0°, Dip 100% Duration > 20ms (VSB, V1:B)
DC OUTPUT CONNECTOR AND SIGNALS
The DC Output Connector is a TYCO MINIPAK HDL Connector TYCO P/N: 1926734-1. Mating pin sequencing shall be 12V_RTN first, 12V second, signals third and PSKILL_L signal
last. PSKILL_L is the last to mate and first to break and is used as a power supply output enable for the 12V rail.
Mating Part: TYCO P/N 1-1926739-8
Power Supply Output Connector Isometric and Front Views
Front Connector View Looking at Blades and Pins (view looking in at rear of power supply)
www.murata-ps.com/support
D1U2-W-400-12-HA4C.A04 Page 3 of 6