VKA150MS24-205C Datasheet, PDF (1/3 Pages) Murata Power Solutions Inc. – 150 Watt Single Output Half Brick DC/DC Converter

OBSOLETE PRODUCT ^{VKA150MS24-205C}
Contact Factory for Replacem¹e⁵n⁰t^WM^ato^t d^Sieⁿl^{gle Output Half Brick DC/DC Converter}
RoHS Compliant
33 - 75V Input Range
High Efficiency: 90% Typical
100μS Transient Response
50 - 100% Load Step
420 kHz Fixed-Frequency
Operation
Remote Sense
UL/CUL 1950, VDE EN60950
Operation to +100°C Baseplate
Temperature
Primary Remote On/Off,
Negative Logic
Output Voltage Trim
Continuout Short-Circuit Protection
Thermal Shutdown
Case Ground Pin
The VKA150MS24-205C DC/DC con-
verter presents an economical and
practical solution for distributed power
system architectures which require
high power density and efficiency while
maintaining system modularity and up-
gradeability. With the ability to operate
over a wide input voltage range of 33
to 75 volts, this module is ideal for use
in battery backup applications com-
mon in todays’ telecommunication and
electronic data processing applications.
The output is fully isolated from the
input, allowing for a variety of polarity
and grounding configurations.
The VKA150MS24-205’s proprietary
control circuitry responds to 50-100%
load steps in 100μSeconds to within
1% nominal Vout.
The patented fixed frequency
architecture combined with surface
mount technology results in a compact,
efficient and reliable solution to DC/DC
conversion requirements. Safety ap-
provals per UL/CUL 1950, EN 60950.
MODEL
VKA150MS24-205C
INPUT
VOLTAGE
48VDC
PRODUCT IDENTIFICATION
VOUT
(VDC)
24.0V
IOUT
(A)
6.25
EFFICIENCY
MIN
TYP
89
90
Device Family
Indicates 150 Watt Regulated Unit
Model Number
Lead Length
0.200”
Remote On-Off Logic:
Negative
C = RoHS Compliant
Ḥ
ISO9001
For full details go to
www.murata-ps.com/rohs
CERTIFIED
www.murata-ps.com
VKA150 MS24-205C
Technical enquiries - email: [e-mail], tel: [phone]
VKA150MS24-205C.B01 Page 1 of 3