|
UWS Datasheet, PDF (1/25 Pages) Murata Power Solutions Inc. – Sixteenth-brick DOSA-Compatible, Wide Input Isolated DC/DC | |||
|
www.murata-ps.com
UWS Series
Sixteenth-brick DOSA-Compatible,
Wide Input Isolated DC/DC Converters
FEATURES
ÂHigh efï¬ciency synchronous rectiï¬er forward
topology
Â18-75 Volts DC wide input range with 3.3, 5 and
12 Volts for Output voltage
ÂUp to 54 Watts total output power with
overtemperature shutdown
ÂTiny 1.31" x 0.91" x 0.36" open frame package
ÂIndustry standard DOSA "brick" format
and pinout
ÂExtensive self-protection shut down features
ÂSmall footprint DC/DC converter, ideal for high
current applications
Â2250 Volt Basic input/output isolation (48V
models)
ÂOperating temperature range -40 to +85°C with
derating
ÂStable no-load operation with no required exter-
nal components
ÂCertiï¬ed to UL 60950-1, 2nd Edition, EN60950-1
safety approvals
Typical units
PRODUCT OVERVIEW
The world of âbrickâ DC/DC converters has seen
a steady size reduction. The UWS series makes
another dramatic size shrink down to a âsixteenth-
brickâ width (0.91 inches) while still retaining a
high power output and full 2250 Volt DC isolation.
The PC-board mount converter family accepts
18 to 75 Volts DC inputs and delivers ï¬xed outputs
regulated to within ±0.125%. The UWS converters
are ideal for datacom and telecom applications,
cell phone towers, data centers, server farms and
network repeaters.
UWS outputs may be trimmed while delivering
fast settling to current step loads and no adverse
effects from higher capacitive loads. Excellent ripple
and noise speciï¬cations assure compatibility to cir-
cuits using CPUâs, ASICâs, programmable logic and
FPGAâs. No minimum load is required. For systems
requiring controlled startup/shutdown, an external
remote On/Off control may use a switch, transistor
or digital logic.
Many self-protection features on the UWS series
avoid both converter and external circuit hazards.
These include input undervoltage lockout and
overtemperature shutdown. The output of these
DC/DC converters have current limit using the
âhiccupâ autorestart technique and the outputs may
be short-circuited indeï¬nitely. Additional features
include output overvoltage and reverse conduction
elimination.
The synchronous rectiï¬er forward topology yields
high efï¬ciency for minimal heat buildup and âno
fanâ operation.
F1
+Vin (1)
External
DC
Power
Source
On/Off
Control
(2)
Open = On
$MPTFE0GG
1PTJUJWF
MPHJD
-Vin (3)
*TPMBUJPO
Barrier
Controller
and Power
5SBOTGFS
t4XJUDIJOH
t'JMUFST
t$VSSFOU4FOTF
Reference and
Error Ampliï¬er
Figure 1. Connection Diagram
Typical topology is shown. Murata Power
Solutions recommends an external fuse.
Ḥ
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
+Vout (8)
4FOTF
4FOTF
Trim (6)
-Vout (4)
*Sense is included on the UWS-3.3/15-Q48
and UWS-5/10-Q48.
MDC_UWS Series.B02 Page 1 of 25
|
▷ |