|
UEE150W Datasheet, PDF (1/35 Pages) Murata Power Solutions Inc. – Isolated, High-Density, Eighth-Brick DOSA Low Profi le DC-DC Converters | |||
|
www.murata-ps.com
Typical units
FEATURES
 Synchronous rectiï¬cation yields high efï¬ciency
over 90%
 36 to 75 Vdc input range (48V nominal)
 Outstanding thermal performance and derating
 Low proï¬le 0.42" height with 0.9" x 2.3" outline
dimensions
 Fully isolated, 2250 Vdc (BASIC) insulation
 Industry standard DOSA eighth-brick pinout and
package and surface mount (SMT) option
 Extensive self-protection and short circuit
features
 On/Off control, trim and sense functions
 Fully protected against temperature and voltage
limits
 RoHS-6 compliant
 UL/IEC 60950-1 and CAN/CSA C22.2 No. 60950-1,
2nd Edition safety approvals
 Monotonic startup into normal and pre-biased
loads
UEE 150W Series
Isolated, High-Density, Eighth-Brick
DOSA Low Proï¬le DC-DC Converters
Output (V)
3.3
5
12
Current (A)
45
30
12.5
Nominal Input (V)
48
48
48
For efï¬cient, fully isolated DC power in the smallest space, the UEE
open frame DC-DC converter series ï¬t in industry-standard âeighth
brickâ outline dimensions and mounting pins (on quarter-brick pinout)
or surface mount option.
PRODUCT OVERVIEW
Units are offered with a ï¬xed output voltage and
current up to 45 Amps. UEEs operate over a wide
temperature range (up to +85 degrees Celsius at
moderate airï¬ow) with full rated power. Synchro-
nous rectiï¬er topology yields excellent efï¬ciency.
UEEs achieve these impressive mechanical and
environmental specs while delivering excellent
electrical performance in an industry standard
DOSA compatible through-hole package or surface
mount option. The unit is fully protected against
input undervoltage, output overcurrent and short
circuit. An on-board temperature sensor shuts
down the converter if thermal limits are reached
and automatically restarts the converter when the
fault is removed.
An On/Off control input enables phased startup
and shutdown in multi-voltage applications. UEEs
include a Sense input to correct for ohmic losses. A
trim input may be connected to a userâs adjustment
potentiometer or trim resistors for output voltage
calibration.
UEEs include industry-standard safety certiï¬-
cations and BASIC I/O insulation provides input/
output isolation to 2250V. Radiation and conducted
emission testing is performed to widely accepted
EMC standards.
F1
+Vin (1)
External
DC
Power
Source
On/Off
Control
(2)
Open = On
logic)
-Vin (3)
Ḥ
For full details go to
www.murata-ps.com/rohs
Barrier
Controller
and Power
Reference and
Error Ampliï¬er
Figure 1. Connection Diagram
Typical topology is shown. Murata Power Solutions recommends an external fuse.
+Vout (8)
Trim (6)
-Vout (4)
www.murata-ps.com/support
MDC_UEE 150W_Series.A02 Page 1 of 35
|
▷ |