English
Language : 

SHM-12 Datasheet, PDF (1/6 Pages) List of Unclassifed Manufacturers – Ultra-Fast, 12-Bit Linear Monolithic Sample-Hold Amplifiers
®
®
INN O VAT IO N a n d E X C E L L E N C E
SHM-12
Ultra-Fast, 12-Bit Linear
Monolithic Sample-Hold Amplifiers
FEATURES
• Fast acquisition time:
10ns to ±0.1%
15ns to ±0.024%
20ns to ±0.012%
• ±0.006% Nonlinearity
• 65µVrms output noise
• 120MHz small signal bandwidth
• 55MHz full power bandwidth
• –80dB feedthrough
• 1ps Aperture jitter
• 250mW power dissipation
• Low cost
GENERAL DESCRIPTION
The SHM-12 is an extremely high-speed and accurate
monolithic sample-and-hold amplifier designed for fast data
acquisition applications. The SHM-12 is accurate (±1LSB at 12
bits over the full military temperature range) and is very fast
(10ns and 15ns acquisition times to accuracies of 10 and 12-
bits, respectively). With this high performance and a full power
bandwidth of 55MHz, the SHM-12 is an ideal device for driving
flash and high-resolution subranging A/D converters.
A careful design optimizes the device for accuracy and speed
over the full military temperature range. The droop rate is a low
±0.5mV/µs. The 30mA output current and guaranteed
specifications for a 100Ω load provide high drive capability.
Operating from ±5V supplies, the SHM-12 consumes only
250mW of power.
INPUT/OUTPUT CONNECTIONS
(CLCC and SOIC-20 Packages)
PIN FUNCTION
PIN FUNCTION
1 –5V SUPPLY
20 +5V SUPPLY
2 –5V SUPPLY
19 SAMPLE/HOLD
3 NOT CONNECTED 18 SAMPLE/HOLD
4 ANALOG INPUT
17 +5V SUPPLY
5 –5V SUPPLY
16 GROUND
6 DO NOT CONNECT 15 EXT. CAPACITOR
7 –5V SUPPLY
14 GROUND
8 DO NOT CONNECT 13 +5V SUPPLY
9 –5V SUPPLY
12 +5V SUPPLY
10 –5V SUPPLY
11 ANALOG OUTPUT
The SHM-12 is built using a fast complementary bipolar
process. The device is available in both military and industrial
temperature ranges. The SHM-12 is packaged in a 20-pin
plastic SOIC or ceramic LCC.
–5V SUPPLY
1, 2, 5, 7, 9, 10
EXTERNAL HOLD
CAPACITOR
15
+5V SUPPLY
12, 13, 17, 20
4
ANALOG INPUT
+1
+1
CH
15pF
18
SAMPLE/HOLD
19
SAMPLE/HOLD
SWITCH
DRIVE
14, 16
GROUND
11 ANALOG
OUTPUT
3
NOT CONNECTED
6, 8
DO NOT
CONNECT
Figure 1. SHM-12 Functional Block Diagram
DATEL, Inc., 11 Cabot Boulevard, Mansfield, MA 02048-1151 (U.S.A.) • Tel: (508) 339-3000 Fax: (508) 339-6356 • For immediate assistance (800) 233-2765