|
OKY-T Datasheet, PDF (1/19 Pages) Murata Manufacturing Co., Ltd. – Adjustable Output 3 and 5-Amp DOSA-SMT PoLs | |||
|
www.murata-ps.com
OKY T/3, T/5-W5 Series
Adjustable Output 3 and 5-Amp DOSA-SMT PoLs
Typical unit
PRODUCT OVERVIEW
The OKY-T/3 and -T/5 series are miniature non-
isolated Point-of-Load (POL) switch mode DC/DC
power converters for embedded applications. The
module is fully compatible with Distributed-power
Open Standards Alliance (DOSA) industry-standard
speciï¬cations (www.dosapower.com). Applications
include powering CPUâs, datacom/telecom systems,
programmable logic and mixed voltage systems.
The wide input range is 2.4 to 5.5 Volts DC. Two
maximum output currents are offered, 3 Amps (T/3
models) or 5 Amps (T/5 models). Based on ï¬xed-
frequency synchronous buck converter switching
topology, the high power conversion efï¬cient Point
of Load (POL) module features programmable
output voltage and On/Off control. These converters
also include under voltage lock out (UVLO), output
short circuit protection, over-current and over
temperature protections.
These units are designed to meet all standard
UL/EN/IEC 60950-1 safety and FCC EMI/RFI
emissions certiï¬cations and RoHS-6 hazardous
substance compliance.
FEATURES
â Non-isolated SMT POL DC/DC power module
â 2.4-5.5Vdc input voltage range
â Programmable output voltage from 0.7525-3.63Vdc
â 3 Amp (T/3) or 5 Amp (T/5) output current models
â Drives 1000 μF ceramic capacitive loads
â High power conversion efï¬ciency at 96%
â Outstanding thermal derating performance
â Over temperature and over current protection
â On/Off control
â UL/EN/IEC 60950-1 safety
â Industry-standard (DOSA) surface-mount package
â RoHS-6 hazardous substance compliance
Contents
Page
Description, Connection Diagram, Photograph
1
Ordering Guide, Model Numbering, Product Label
2
Mechanical Speciï¬cations, Input/Output Pinout
3
Detailed Electrical Speciï¬cations
4
Output Voltage Adjustment, Soldering Guidelines
5
Technical Notes
6
OKY-T/3-W5 Performance Data and Oscillograms
9
OKY-T/5-W5 Performance Data and Oscillograms
13
Tape and Reel Information
19
Connection Diagram
+Vin
F1
On/Off
Control
External
DC
Power
Source
Open = On
Closed = Off
(Positive
On/Off)
Controller
t4XJUDIJOH
t'JMUFST
t$VSSFOU4FOTF
Reference and
Error Ampliï¬er
Common
Figure 1. OKY-T/3, -T/5
Note: Murata Power Solutions strongly recommends an external input fuse, F1.
See speciï¬cations.
+Vout
Trim
Common
Ḥ
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
MDC_OKY-T/3,T/5-W5 Series.A12 Page 1 of 19
|
▷ |