|
OKR-T3_10 Datasheet, PDF (1/11 Pages) Murata Power Solutions Inc. – Adjustable Output 3-Amp SIP-mount DC/DC Converters | |||
|
www.murata-ps.com
OKR-T/3 Series
Adjustable Output 3-Amp SIP-mount DC/DC Converters
PRODUCT OVERVIEW
The OKR-T/3 series are miniature SIP non-isolated Point-of-Load (PoL) DC/DC power converters
measuring only 0.41 x 0.65 x 0.22 inches (10.4 x 16.5 x 5.6 mm). The wide input range is 4.5 to 14 Volts
DC. Based on 600 KHz synchronous buck topology, the high power conversion efï¬cient Point of Load
(PoL) module features programmable output voltage and On/Off control, under voltage lock out (UVLO),
overcurrent and over temperature protections. These units meet all standard UL/EN/ IEC 60950-1 safety
certiï¬cations and RoHS-6 hazardous substance compliance.
Typical unit
FEATURES
 600 KHz operation
 4.5-14 Vdc input voltage range
 Programmable output voltage from 0.591-6.0 VDC
 Drives up to 200 μF ceramic capacitive loads
 High power conversion efï¬ciency at 93%
 Outstanding thermal derating performance
 Over temperature and over current protection
 On/Off control
 SIP, 0.41 x 0.65 x 0.4 inches (10.4 x 16.5 x 10.2 mm).
 Meets UL/EN/IEC 60950-1 safety certiï¬cation
 RoHS-6 hazardous substance compliance
Contents
Page
Description, Connection Diagram, Photograph
1
Ordering Guide, Model Numbering, Product Label
2
Mechanical Speciï¬cations, Input/Output Pinout
3
Detailed Electrical Speciï¬cations
4
Trim Connections
5
Application Notes
6
Performance Data
8
Oscillograms
9
Soldering Guidelines
11
+Vin
F1
On/Off
Control
External
DC
Power
Source
Open = On
Closed = Off
(Positive
On/Off)
Common
Ḥ
For full details go to
www.murata-ps.com/rohs
Figure 1. Connection Diagram
Controller
t4XJUDIJOH
t'JMUFST
t$VSSFOU4FOTF
Reference and
Error Ampliï¬er
www.murata-ps.com
+Vout
Trim
Common
email: sales@murata-ps.com
25 Feb 2010 MDC_OKR-T/3-W12.A04 Page 1 of 11
|
▷ |