|
OKR-T Datasheet, PDF (1/11 Pages) Murata Manufacturing Co., Ltd. – Adjustable Output 1.5-Amp SIP-mount DC/DC Converters | |||
|
www.murata-ps.com
OKR-T/6 Series
Adjustable Output 6-Amp SIP-mount DC/DC Converters
Typical unit
FEATURES
ï®ï 600 KHz operation
ï®ï 4.5-14 Vdc input voltage range
ï®ï Programmable output voltage from 0.591-6.0 VDC
ï®ï Drives up to 200 μF ceramic capacitive loads
ï®ï High power conversion efï¬ciency at 93%
ï®ï Outstanding thermal derating performance
ï®ï Over temperature and over current protection
ï®ï On/Off control
ï®ï SIP, 0.41 x 0.65 x 0.30 inches (10.4 x 16.5 x
7.62 mm).
ï®ï Meets UL/EN/IEC 60950-1 safety certiï¬cation
ï®ï RoHS-6 hazardous substance compliance
PRODUCT OVERVIEW
The OKR-T/6 series are miniature SIP non-isolated Point-of-Load (PoL) DC/DC power converters
measuring only 0.41 x 0.65 x 0.30 inches (10.4 x 16.5 x 7.62 mm). The wide input range is 4.5 to 14
Volts DC. Based on 600 KHz synchronous buck topology, the high power conversion efï¬cient Point of Load
(PoL) module features programmable output voltage and On/Off control, under voltage lock out (UVLO),
overcurrent and over temperature protections. These units meet all standard UL/EN/ IEC 60950-1 safety
certiï¬cations and RoHS-6 hazardous substance compliance.
+Vin
F1
On/Off
Control
External
DC
Power
Source
Open = On
Closed = Off
(Positive
On/Off)
Common
Figure 1. Connection Diagram
Controller
t4XJUDIJOH
t'JMUFST
t$VSSFOU4FOTF
Reference and
Error Ampliï¬er
Ḥ
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
+Vout
Trim
Common
MDC_OKR-T/6-W12 Series.B06 Page 1 of 11
|
▷ |