DMS-20PC-4-DCM Datasheet, PDF (1/2 Pages) Murata Power Solutions Inc. – Self-Powered LED Display, Negative Input DC Voltage Monitor

DMS-20PC-4/5/6-DCM
Self-Powered LED Display, Negative Input
DC Voltage Monitor
FEATURES
N Self-powered, only two connections required
N –4.5 to –20Vdc, –18 to –50Vdc, and –30 to –264Vdc
models
N Can be used with positve-reading DMS-20PC-DCM's
N Ultra-low power consumption (8mA typ.)
N 0.37"/9.4mm high, bright red, LED displays
N Subminiature 1.38" x 0.88" x 1.0" packages
Functional Specifications
Input
Voltage Range: ~
DMS-20PC-4-DCM
DMS-20PC-5-DCM
DMS-20PC-6-DCM
Current Consumption:
DMS-20PC-4/5-DCM
DMS-20PC-6-DCM
Performance
Sampling Rate
Resolution:
DMS-20PC-4-DCM
DMS-20PC-5-DCM
DMS-20PC-6-DCM
Accuracy @ +25°C:
DMS-20PC-4-DCM
DMS-20PC-5-DCM
DMS-20PC-6-DCM
Mechanical
Dimensions
Display Type
Weight
Case Material
Environmental
Operating Temperature
Storage Temperature
Humidity (Non-condensing)
–4.50 to –19.99Vdc
–18.0 to –50.0Vdc
–30 to –264Vdc
13mA (max.)
7mA (max.)
2.5 readings/second
±0.01V
±0.1V
±1V
±0.01V (typ.), ±0.03V (max.)
±0.1V(typ.), ±0.2V (max.)
±1V(typ.), ±2V (max.)
1.38” x 0.88” x 1.00”
3 & 3½ digit, red LED,
0.37”/9.4mm
1 ounce (28 grams)
Polycarbonate
–25 to +60°C
–40 to +75°C
0 to 95%
~ Operation and accuracy at inputs above or below this range
are not specified.
DATEL’s DMS-20PC-DCM Series of self-powered, negative-reading, dc voltage monitors
are great replacements for older, hard-to-read, analog meters. Simply connect a negative
voltage across the rear terminals and the meters are fully operational! Negative-input
DCM’s can be easily combined with positive-reading DMS-
20PC-DCM’s for monitoring dual-polarity power supplies.
Three versions are available: one for –4.50 to –19.99Vdc
(0.01V resolution), one for –18.0 to –50.0Vdc (0.1V resolution),
and one for –30 to –264Vdc (1V resolution). Their large,
0.37”/9.4mm, bright red LED displays can be easily read
from 15 feet away. Built-in reverse polarity protection
assures simple, trouble-free installation.
All DMS-20PC-DCM’s employ a high-resolution, 3½ digit
A/D converter and precision metal-film resistors to achieve
outstanding performance over an operating temperature
range of –25 to +60°C. A rugged, epoxy-encapsulated,
polycarbonate case provides excellent protection against
moisture, shock and vibration.
Typical panel
mount installation
Suggested wiring
(User supplied)
Ordering Information
DMS-20PC-4-DCM
DMS-20PC-5-DCM
DMS-20PC-6-DCM
DMS-20-CP
DMS-BZL3
DMS-BZL4
–4.50 to –19.99V dc voltage monitor
–18.0 to –50.0V dc voltage monitor
–30 to –264V dc voltage monitor
Panel cutout punch
Panel mount bezel assembly
Panel mount bezel with sealing gasket
Brass screws (6-32 thread) and a panel-mount retaining clip are supplied with each meter
Ḥ
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com
Technical enquiries email: [e-mail], tel: [phone]
MPM_DMS-20PC-4-DCM.B02 Page 1 of 2