|
D1U86-D-1600-12-HXXDC Datasheet, PDF (1/7 Pages) Murata Power Solutions Inc. – 86mm 1U Front End DC-DC Power Supply Converter | |||
|
D1U86-D-1600-12-HBxDC Series
86mm 1U Front End DC-DC Power Supply Converter
D1U86-D-1600-12-HB3DC variant shown
FEATURES
ï® 1600W output power
ï® 93% efï¬ciency at half load
ï® 12V main output
ï® 12V standby output of 30W
ï® 1U height: 3.4" x 7.75" x 1.59"
ï® 38.6 Watts per cubic inch density
ï® N+1 redundancy, including hot plugging (up to
ï® 8 in parallel)
ï® Current sharing on 12V main output, ORing FET
ï® Overvoltage, overcurrent, overtemperature
protection
ï® Internal cooling fan (variable speed)
ï® PMBus⢠/ I²C interface monitoring and control
ï® RoHS compliant
ï® Two Year Warranty
www.murata-ps.com/en/3d/acdc.html
www.murata-ps.com/en/3d/acdc.html
www.murata-ps.com/en/3d/acdc.html
www.murata-ps.com/en/3d/acdc.html
www.murata-ps.com/en/3d/acdc.html
www.murata-ps.com/en/3d/acdc.html
Available now at
www.murata-ps.com/en/3d/acdc.html
PRODUCT OVERVIEW
The D1U86-D-1600-12-HBxDC series are highly efï¬cient 1600 watt, DC input front end supplies with a
12V main output and a 12V (30W) standby. They have current sharing and up to 8 supplies may be
operated in parallel. The supplies may be hot plugged, they recover from overtemperature faults, and
have logic and PMBus monitoring and control. Their low proï¬le 1U package and >38.6W/cubic inch
power density make them ideal for delivering reliable, efï¬cient power to servers, workstations, storage
systems and other 12V distributed power systems.
ORDERING GUIDE
Part Number
D1U86-D-1600-12-HB4DC
D1U86-D-1600-12-HB3DC
Power Output
1600W
Main Output
12Vdc
Standby Output1 Airflow
12Vdc
Back to front
Front to back
Handle
Colour
Red
Blue
INPUT CHARACTERISTICS
Parameter
Conditions
Input Voltage Operating Range
Turn-on Voltage
Ramp up
Turn-off Voltage
Ramp down
Maximum Current at Vin = -40Vdc 1600W
DC Line Inrush Peak Current
Efficiency (48V)
Cold start between 0 to
200msec
20% load
50% load
100% load
Min. Nom. Max. Units
-40 -48 -72 Vdc
-43 -43.5
-38.5 -39
-44
-39.5
Vdc
47 Adc
40
72
50
100
Apk
92
93
%
89
OUTPUT VOLTAGE CHARACTERISTICS
Output Parameter
Voltage
Conditions
Min. Typ. Max. Units
Voltage Set Point
50% load
Line and Load Regulation
12.17 12.20 12.23
11.4
12.6
Vdc
12V
Droop
Ripple Voltage & Noise1 20MHz Bandwidth
3.10
mV/A
120 mV p-p
Output Current
0
133.3
A
Load Capacitance
0
10000 μF
Voltage Set Point
50% load
Line and Load Regulation
11.97 12.0 12.03
11.4
12.6
Vdc
12VSB
Droop
Ripple Voltage & Noise1 20MHz Bandwidth
120
mV/A
120 mV p-p
Output Current
0
2.5
A
Load Capacitance
0
350
μF
1 Ripple and noise are measured with 0.1 μF of ceramic capacitance and 10 μF of tantalum capacitance on each of the power
supply outputs. A short coaxial cable with 50Ω scope termination is used.
For full details go to
www.murata-ps.com/rohs
CB
Test Certificate
and Test Report
www.murata-ps.com/support
D1U86-D-1600-12-HBxDC.A02 Page 1 of 7
|
▷ |