D1U-W-2000-48-HC2C Datasheet, PDF (1/7 Pages) Murata Power Solutions Inc. – AC/DC Front End Power Supply + S1U Power Shelf

D1U-W-2000-48-Hx Series
AC/DC Front End Power Supply + S1U Power Shelf
FEATURES
RoHS compliant
2000W (220Vac), 1200W (110Vac)
Output power
48V Main output,
3.3V, 5V or 12V standby output
1U sized; dimensions 12” x 4.75” x 1.6”
21.9 Watts per cubic inch density
N+1 redundancy capable,
including hot-docking
Active current sharing on main output
Over-voltage, over-current,
over-temperature protection
Internal cooling fans
I²C Bus Interface with status indicators
Optional 1U x 19” power-shelf
www.murata-ps.com
PRODUCT OVERVIEW
The D1U-W-2000 is a 2000 Watt, power-factor-corrected (PFC) front-end power supply for hot-swapping redundant
systems. The main output is 48V and standby output of either 5V or 3.3V. Packaged in 1U low profile, it is designed
to deliver reliable bulk power to servers, workstations, storage systems or any 48V distributed power architecture
systems requiring high power density. The highly efficient electrical and thermal design with internal cooling fans
supports reliable operation conditions. The D1U-W-2000 is designed to auto-recover from over-temperature faults.
Status information is provided with front panel LEDs, logic signals and I²C management interface. Three units can be
packaged into an optional 19” 1U power shelf to provide up to 6.0kW of power.
The S1U-X3 is a 1U x 19” EIA Rack Mount Power Shelf designed for holding three D1U Front End Power Supplies
in current sharing applications. It is intended for distributed power architecture applications in the Servers, Storage
Networking and Data Communications markets. There are two lug terminal connections for #2 AWG cabling for the DC
output. System connection through the I²C bus reports the performance status of the power supplies within the power
shelf. Two Power Shelves can operate in parallel by an optional Shelf-to-Shelf cable, doubling the power output to the
maximum capability of 12kW for two 48V power shelves.
SELECTION GUIDE
Part Number
D1U-W-2000-48-HC2C
D1U-W-2000-48-HA2C
D1U-W-2000-48-HB2C
Part Number
S1U-3X-16-A-48-RC
Power Output Power Output
High Line AC Low Line AC
2000W
1200W
2000W
1200W
2000W
1200W
Description
Power shelf for 48V D1U
Main Output
48V
48V
48V
Standby
Output
3.3V
5V
12V
Airflow
Back to front
Back to front
Back to front
INPUT CHARACTERISTICS
Parameter
Input Voltage Operating Range
Input Frequency
Turn-on Input Voltage
Turn-off Input Voltage
Maximum Input Current
Inrush Current
Power Factor
Conditions
Min. Typ. Max. Units
Low Line AC
High Line AC
90
180
140
264
Vac
47 50/60 63
Hz
Ramp up
Ramp down
78.5
70.5
86.5
78
Vac
Low Line AC 90Vac
High Line AC 180Vac
15
10
Arms
Cold start between 0-1msec
90
Apk
Output load >90%
95%
Output load >50%
75%
OUTPUT VOLTAGE CHARACTERISTICS
Output
Voltage
Parameter
Conditions
48V
3.3Vsb
5Vsb
12Vsb
Voltage Set Point Accuracy
Line and Load Regulation
Ripple Voltage & Noise¹
Output Current
Load Capacitance
Voltage Set Point Accuracy
Line and Load Regulation
Ripple Voltage & Noise¹
Operating Range
Load Capacitance
Voltage Set Point Accuracy
Line and Load Regulation
Ripple Voltage & Noise¹
Operating Range
Load Capacitance
Voltage Set Point Accuracy
Line and Load Regulation
Ripple Voltage & Noise¹
Operating Range
Load Capacitance
20MHz Bandwidth
20MHz Bandwidth
20MHz Bandwidth
20MHz Bandwidth
Min. Typ. Max. Units
46.54
48
49.44
Vdc
480 mV p-p
2
41.3
A
10000 μF
3.2
3.3
3.4
Vdc
50 mV p-p
0
4.5
A
1530 μF
4.85
5
5.15
Vdc
50 mV p-p
0
4
A
1530 μF
11.2
12
12.4
Vdc
120 mV p-p
0
1.7
A
1530 μF
Technical enquiries email: [e-mail], tel: [phone]
CPS_D1U-W-2000-48-Hx.C06 Page 1 of 7