English
Language : 

56050C Datasheet, PDF (1/2 Pages) Murata Power Solutions Inc. – 10A Current Sensing Transformers
5600 Series
10A Current Sensing Transformers
FEATURES
RoHS compliant
50, 100, 200 & 300 Turn variants
Primary current rating 10A
20kHz-200kHz frequency range
Centre tapped variants available
DESCRIPTION
The 5600 series of current sense transformers
are designed to monitor AC currents. They can
be used for high frequency current sensing, for
example in switched-mode power supplies, motor
control and electronic lighting ballasts.
SELECTION GUIDE
Number of
Order Code
Turns
±1Turn
56050C
50
56100C
100
56200C
200
56300C
300
56T100C
100CT
56T200C
200CT
56T300C
300CT
Inductance
Range
Pins 1&3
5.00 - 9.30mH @1V, 50kHz
20.0 - 37.0mH @1V, 50kHz
80.0 - 150mH @1V, 10kHz
180 - 335mH @1V, 10kHz
20.0 - 37.0mH @1V, 50kHz
80.0 - 150mH @1V, 10kHz
180 - 335mH @1V, 10kHz
DC
Resistance
Pins 1&3, Ω
0.133 - 0.199
0.93 - 1.40
1.87 - 2.81
5.73 - 8.59
0.93 - 1.40
1.87 - 2.81
5.73 - 8.59
Terminating Resistance
to Produce 1VOUT/1AIN
Ω
50
100
200
300
100
200
300
ABSOLUTE MAXIMUM RATINGS
Operating free air temperature range
Storage temperature range
-40°C to 85°C
-40°C to 125°C
SOLDERING INFORMATION1
Peak wave solder temperature
Pin finish
300˚C for 10 seconds
Tin
TECHNICAL NOTES
ISOLATION VOLTAGE
All 5600 current sense transformers are tested at 500Vdc for a minimum of 1 second during our standard test
procedure.
In addition, as part of our qualification process carried out prior to product launch, the 5600 series demonstrated
no isolation breakdown at 10kVdc or 6kVac with a bare conductor as the primary winding. Whilst this does not
imply these parts are designed for environments where such high voltages may be present, it does demonstrate
the level of isolation voltage these products are able to withstand. Full mains safety isolation can be achieved with
appropriately insulated wire on the primary winding.
Specifications typical at T = 25°C
A
1 For further information, please visit www.murata-ps.com/rohs


For full details go to
www.murata-ps.com/rohs
www.murata-ps.com
Technical enquiries - email: mk@murata-ps.com, tel: +44 (0)1908 615232
KMP_5600C_B02 Page 1 of 2