2250-XC6DT2 Datasheet, PDF (3/4 Pages) MTU Onsite Energy Corporation – DIESEL ENGINE-GENERATOR SET

3 ^{/ //  /} 2250-XC6DT2
Application data
//  _Engine
Manufacturer
Model
Type
Arrangement
Displacement: Cu In (lit)
Bore: in (cm)
Stroke: in (cm)
Compression Ratio
Rated RPM
Engine Governor
Max Power: Standby: bhp (kWm)
Max Power: Prime: bhp (kWm)
Regulation
Frequency
Air Cleaner
//  _{Liquid Capacity (Lubrication)}
Total Oil System: gal (lit)
Engine Jacket Water Capacity: gal (lit)
After Cooler Water Capacity: gal (lit)
System Coolant Capacity: gal (lit)
//  _Electrical
Electric Volts DC
Cold Cranking Amps Under 0°F (-17.8°C)
//  _{Fuel System}
Fuel Supply Connection Size
Fuel Return Connection Size
Maximum Fuel Lift: ft (m)
Recommended Fuel
Total Fuel Flow: gal/hr (lit/hr)
//  _{Fuel Consumption}
MTU Detroit Diesel
16V4000 G83
(T1638A36)
4-Cycle
16-V
4,656 (76.3)
6.69 (17)
8.27 (21)
16.5:1
1,800
ADEC
3,351 (2,500)
3,056 (2,280)
±.25%
60 Hz
Dry
At 100% of Power Rating: gal/hr (lit/hr)
At 75% of Power Rating: gal/hr( lit/hr)
At 50% of Power Rating: gal/hr (lit/hr)
STANDBY
163 (617)
123 (467)
86 (325)
PRIME
147 (558)
113 (426)
79 (299)
//  _{Cooling - Radiator System}
STANDBY
Ambient Capacity of Radiator: °F (°C) 104 (40)
Max. Restriction of Cooling Air, Intake,
and Discharge Side of Rad.: in. H₂0 (kPa) 0.5 (0.12)
Water Pump Capacity: gpm (lit/min)
357 (1,350)
After Cooler Pump
Capacity: gpm (lit/min)
154 (583)
Heat Rejection to Coolant: BTUM (kW) 54,993 (967)
Heat Rejection to After Cooler: BTUM (kW) 42,539 (748)
Heat Radiated to Ambient: BTUM (kW) 11,711 (206)
PRIME
104 (40)
0.5 (0.12)
357 (1,350)
154 (583)
49,704 (874)
38,160 (671)
10,615 (186.7)
79.3 (300)
46.2 (175)
13.2 (50)
172 (651)
24
2,600
1” NPT
3/4” NPT
3 (1)
Diesel #2
269 (1,020)
//  _{Air Requirements}
Aspirating: *SCFM (m³/min)
Air Flow Required for Rad.
Cooled Unit: *SCFM (m³/min)
Air Flow Required for Heat
Exchanger/Remote Rad. based
on 25°F Rise: *SCFM (m³/min)
STANDBY PRIME
6,780 (192) 6,357 (180)
89,005 (2,520) 89,005 (2,520)
26,412 (752) 23,940 (682)
* Air density = 0.0739 lbm/ft³ (1.184 kg/m³)
//  _{Exhaust System}
Gas Temp. (Stack): °F (°C)
Gas Volume at Stack
Temp: CFM (m³/min)
Maximum Allowable
Back Pressure: in. H₂0 (kPa)
STANDBY
941 (505)
PRIME
896 (480)
17,799 (504) 16,103 (456)
34.1 (8.5) 34.1 (8.5)