XO7080_16 Datasheet, PDF (2/2 Pages) MTRONPTI – MtronPTI XO7080 Pure Sine Output SMT VCXO

MtronPTI XO7080 Pure Sine Output SMT VCXO
P/N: XO7080-xxx
Shock and Vibration:
Three (3) ½ sine shock pulses of the given force and duration on each of the three (3) axis. The VCXO shall operate during and after the shock
pulses.
Direction: Force
Duration (msec)
Vertical: 160 G’s
3 to 5
Front to Back: 80 G’s
3 to 5
Side to Side: 80 G’s
3 to 5
VCXO shall operate for periods up to 2-hours duration when subjected to any of the vibration in the given ranges, with the corresponding input
amplitude listed. The requirement shall be met regardless of the direction of the vibration.
Frequency (Hz)
4 – 15
16 - 25
26 - 33
Input Amplitude (inches)
0.04 ±0.008
0.03 ±0.006
0.04 ±0.008
Figure 1 - XO7080 Outline Drawing
Figure 2 – Recommended PAD Layout
Data Sheet Revision Table:
Date
Rev.
12-28-15
A
Orig.
DD
Details of Revision
Preliminary Draft
Figure 3 – Recommended Reflow Profile
2 of 2
The information contained herein is proprietary to MtronPTI and is submitted in confidence.
This information may not be copied or divulged without written permission from MtronPTI.