K1700A Datasheet, PDF (2/2 Pages) MTRONPTI – 5V Temperature Compensated Voltage Controlled Crystal Oscillators

K1700A Series
5V Temperature Compensated Voltage Controlled Crystal Oscillators
PIN FUNCTION
1 Voltage Control
7 Gnd/ & Case Gnd
8 Output
14 ^{+ VCC}
SHIPPING TUBE CROSS SECTION
OUTPUT WAVEFORM
TEST CIRCUIT DIAGRAM
MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS
TEST METHODS
Temperature Cycle
Mechanical Shock
Vibration
Humidity Steady State
Thermal Shock
Electrostatic Discharge
Solderability
Hermeticity
Resistance to Soldering
Lead Integrity
Marking Permanence
Life Test
REFERENCE PROCEDURES
DESCRIPTION
MIL-STD-833, Mtd 1010, Cond. B
-55°C to +125°C; Air-to-Air; 100 cycles; 10
min. dwell
MIL-STD-883, Mtd 2002, Cond. B
1500 g’s
MIL-STD 883, Mtd 2007, Cond. B
20-2000 Hz; 0.06 inch; 15g’s; 3 planes
MIL-STD-202, Mtd 103
40°C; 90%-95% R.H.; 56 days
MIL-STD-883, Mtd 1011.7 Cond. B
100°C to 0°C; Water-to-Water; 15 cycles
MIL-STD-883, Mtd 3015 Class II
2 KV to 4 KV Threshold
MIL-STD-883, Mtd 2022.2
Solder dip; Meniscograph Criteria
MIL-STD-883, Mtd 1014.8, Cond. A1 Mass spectro. 2 x 10-8 atmos. CC/sec He
MIL-STD-202, Mtd 210A, Cond. C
260°C; 10 seconds: 1 inch/sec.
MIL-STD-883, Mtd 2004.5, Cond. A, B1 Lead tension & bend stress
MIL-STD-883, Mtd 2015.8
Resistance to solvents
MIL-STD-883, Mtd 1005.6
125°C, powered, 1000 hours minimum
2553 N. Edgington Street, Franklin Park, IL 60131 " Phone: [phone] " Fax: [phone]
800-888-1499 or www.champtech.com
2