K1523BA_07 Datasheet, PDF (2/2 Pages) MTRONPTI – 14 DIP, 5.0 Volt, TTL/HCMOS, VCXO

K1523BA Series
14 DIP, 5.0 Volt, TTL/HCMOS, VCXO
K1523BA Series
THIS PRODUCT IS NOT RECOMMENDED FOR^VN^oE^ltW^agD^eE^CS^oIG^ntN^roS^ll.^{ed Crystal Oscillators}
PLEASE REFER TO THE MV PRODUCT SERIES.
PIN FUNCTION
1
Voltage Control
7
Gnd/ & Case Gnd
8
Output
14 ^{+ VCC}
SHIPPING TUBE CROSS SECTION
OUTPUT WAVEFORM
TEST CIRCUIT DIAGRAM
MECHANICAL AND ENVIRONMENTAL SPECIFICATIONS
TEST METHODS
Temperature Cycle
Mechanical Shock
Vibration
Humidity Steady State
Thermal Shock
Electrostatic Discharge
Solderability
Hermeticity
Resistance to Soldering
Lead Integrity
Marking Permanence
Life Test
REFERENCE PROCEDURES
DESCRIPTION
MIL-STD-833, Mtd 1010, Cond. B
-55°C to +125°C; Air-to-Air; 100 cycles; 10
min. dwell
MIL-STD-202, Mtd 213, Cond. D
500 g’s
MIL-STD 202, Mtd 204, Cond. B
10-2000 Hz; 0.06 inch; 15g; 3 planes
MIL-STD-202, Mtd 103
40°C; 90%-95% R.H.; 56 days
MIL-STD-883, Mtd 1011.7 Cond. A
100°C to 0°C; Water-to-Water; 15 cycles
MIL-STD-883, Mtd 3015 Class II
2 KV to 4 KV Threshold
MIL-STD-883, Mtd 2022.2
Solder dip; Meniscograph Criteria
MIL-STD-883, Mtd 1014.8, Cond. A1 Mass spectro. 2 x 10-8 atmos. CC/sec He
MIL-STD-202, Mtd 210A, Cond. C
240°C; 10 seconds: 1 inch/sec.
MIL-STD-883, Mtd 2004.5, Cond. A, B1 Lead tension & bend stress
MIL-STD-883, Mtd 2015.8
Resistance to solvents
MIL-STD-883, Mtd 1005.6
125°C, powered, 1000 hours minimum
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see2w5w5w3.mNtr.onEpdti.gcoinmgfotor onurScotmrepelette, oFffrearinngkalnind dPetaailrekd,daILtash6ee0ts1. C3o1ntayctPushfoornyeou:r 8ap4p7lic.a4ti5on1s.p1e0ci0fic0reyquFireamxe:nt8s:4M7tr.o4n5PT1I.71-580805-762-8800.
800-888-1499 or www.champtech.com
Revision: 03-09-07