English
Language : 

Z Datasheet, PDF (1/2 Pages) MTRONPTI – Surface Mount Bandpass Filter
Z Series
Surface Mount Bandpass Filter
True surface mounting for uniformity with other system
components.
Overview
Standard Parameters
Special Parameters
Frequency Range
Percentage
Bandwidth
Maximum VSWR
Average Input
Power
Phase Linearity
70 to 1000 MHz
1 to 100%
1.5:1
1 Watt
± 5°
30 to 1500 MHz
0.5 to 200%
1.2:1
Up to 5 Watts
± 2°
Phase Matching ± 2°
± 1°
Maximum Up to 50 dBc
Attenuation
Up to 65 dBc
Topology
Nominal
Impedance
Chebychev
50 Ohms
*Consult Factory
**Consult Factory
Number of
Sections
Shock
3
5 G's
5
Up to 500 G's
Vibration
Humidity
5 G's
90%, non-condensing
Up to 500 G's
Up to 100%, non-condensing
Alititude Unlimited
Unlimited
Operating 0 to +50 °Celsius
Temperature
-55 to +125 °Celsius
Storage -55 to +85 °Celsius
Temperature
-65 to +150 °Celsius
Gross Leak
Fine Leak
As required
As required
As required
As required
Moisure 100%
Resistance
100%
Other parameters may be specified. Please consult factory for any deviation from standard.
Comments
Measured up to 10,000 feet
See Below
See Below
See Below
See Below
See Below
See Below
Additional testing charges will apply
Additional testing charges will apply
*Other topologies are available upon requrest or design need. Tese can include, but are not limited to:
Gaussian, Butterworth, Bessel, Elliptical, and Pole-placed designs.
**Other impedances can be achieved, but the package is designed as a 50 Ohm unit. Matching to any other impedance will need prior approval and may not be
guaranteed.
Any environmental testing will incure additional charges. Consult factory for costs associated with environmental testing. All filters can be "Designed to" and may not
require the additional testing. Each application will be different.
http://www.mtronpti.com/products/Filter/Bandpass/y-series-surface-mount-bandpass