XF9380R Datasheet, PDF (1/2 Pages) MTRONPTI – Specification for a 3rd Overtone 3-Pole Monolithic SMD Crystal Filter

Specification for a 3rd Overtone 3-Pole Monolithic SMD Crystal Filter
MtronPTI P/N: XF9380R
I. General & Electrical Requirements:
1. Center Frequency (F_ON): 90.0MHz
2. 3dB Passband:  F_ON 10.0kHz and ≤ F_ON 15.0kHz
3. Insertion Loss (@ peak of transmission within the 3dB passband): ≤ 3.0dB
4. Passband Ripple (peak-valley): ≤ 1.0dB
5. Rejection (Minimum, Relative to Insertion Loss): Subject to Verification at Prototype Build
@ 15dB: ≤ F_O 25.0kHz
@ 30dB; ≤ F_O 50.0kHz
6. Spurious Responses: 20dB minimum Subject to Verification at Prototype Build
7. Input Signal Level: ≤ 0dBm
8. Z_S/Z_L: 1500 // -1.4pF nominal Subject to Verification at Prototype Build
II. Environmental & Physical Requirements:
1. Temperature Range
Operating: -20C to +70C
Storage: -40C to +85C
2. Solderability: Per EIAJ-STD-002
3. Package: SMD (ref drawing Figure 1)
4. Full RoHS Compliance
Figure 1 – Filter Package Outline Drawing
Rev. - 01/10/12
Page 1 of 2
The information contained herein is proprietary to MtronPTI and is submitted in confidence.
This information may not be copied or divulged without the express written permission of MtronPTI