XF9370 Datasheet, PDF (1/2 Pages) MTRONPTI – Specification for a Connectorized Crystal Filter

Specification for a Connectorized Crystal Filter
MtronPTI P/N: XF9370
I. General & Electrical Requirements
1. Center Frequency (F_ON): 73.0MHz
2. 1dB Bandwidth:  80.0kHz
3. Insertion Loss (@ peak of transmission within the 1dB bandwidth): ≤ 3.0dB
4. Passband Ripple (peak-valley): ≤ 1dB
5. Input/Output VSWR: ≤ 1.4:1
6. Group Delay
Absolute Delay: 2.74µsec ±0.25 µsec
Delay Variation (any 5kHz increment within F_ON ±35kHz): ≤ 0.75ηsec
7. Rejection:
≥ 25dBc: 59.5MHz to 72.6MHz
≥ 25dBc: 73.57MHz to 74.63MHz
8. Input Signal Level: ≤ 0dBm
9. Z_S/Z_L: 50 nominal
II. Environmental & Physical Requirements:
1. Temperature Range
Operating: -40C to +85C
Storage: -45C to +90C
2. Package: Connectorized (ref drawing Figure 1)
Figure 1 – Filter Package Outline Drawing
Rev. - 11/15/11
Page 1 of 2
Proprietary Document Information contained herein is proprietary to MtronPTI and is submitted in confidence.
Information may not be copied or divulged without written permission from MtronPTI.