XF9357 Datasheet, PDF (1/2 Pages) MTRONPTI – Proposed Specification for a Crystal Filter

Proposed Specification for a Crystal Filter
MtronPTI P/N: XF9357
I. General & Electrical Requirements
1. Center Frequency (F_ON): 60.24MHz
2. 0.5dB bandwidth:  80kHz
3. 1.0dB bandwidth:  160kHz
4. In-Band Flatness: ≤ 0.3dB
5. Insertion Loss (@ peak of transmission within the 0.5dB bandwidth): ≤ 5.0dB
6. Amplitude Ripple (peak-valley): ≤ 0.5dB
7. Input/Output VSWR: ≤ 1.5:1
8. In-Band Phase Linearity: ≤ ±6˚
9. Absolute Group Delay (within the 160kHz bandwidth): ≤ 7.5µsec
10. Stopband Attenuation (Minimum, Relative to Insertion Loss)
70dB: ≤ F_ON - 800kHz
70dB:  F_ON + 800kHz
11. Input Third-Order Intercept Point (with 0dBm input power):  35dBm
12. Shape Factor (Δf_-60dB/Δf_-0.5dB): ≤ 5
13. Input Signal Level: ≤ +20dBm
14. Z_IN/Z_OUT: 50Ω nominal
Note: All electrical performance specifications are to be verified and/or adjusted at the prototype build stage.
II. Environmental & Physical Requirements:
1. Temperature Range
Operating: -10C to +60C
Storage: -45C to +85C
2. Solderability: Per EIAJ-STD-002
3. Package: Reference Drawing Figure 1
Figure 1 – Filter Package Outline Drawing
Rev. - 09/07/11
Page 1 of 2
Proprietary Document Information contained herein is proprietary to MtronPTI and is
submitted in confidence. Information may not be copied or divulged without written
permission from MtronPTI.