|
XF9334R Datasheet, PDF (1/1 Pages) MTRONPTI – Specification for a Monolithic SMD Crystal Filter | |||
|
Specification for a Monolithic SMD Crystal Filter
MtronPTI P/N: XF9334R
I. GENERAL & ELECTRICAL REQUIREMENTS
1. Center Frequency (FON): 45.0MHz
2. 3dB Passband:ï³ FON ï±15.0kHz
3. Insertion Loss (@ peak of transmission within the 3dB passband): ⤠3.0dB
4. Passband Ripple (peak-valley): ⤠1.0dB
5. Rejection (Minimum, Relative to Insertion Loss)
15dB: FON ï±50.0kHz maximum
70dB: FON -1000.0kHz to FON -800.0kHz
6. Terminating Impedance: 1100ï // 0pF nominal
Note 1: All electrical performance specifications are valid over the full Operating Temperature Range (-30ËC to +85ËC) unless
otherwise noted.
II. ENVIRONMENTAL, PHYSICAL & REFLOW REQUIREMENTS:
1. Temperature Range
Operating: -30ï°C to +85ï°C
Storage: -40ï°C to +85ï°C
2. Solderability: Per EIAJ-STD-002
3. Package: SMD (ref drawing Figure 1)
4. RoHS Compliant
Figure 1 â Filter Package Outline Drawing
Figure 2 â Recommended Reflow Profile
Rev. - 06/23/11
Page 1 of 1
Proprietary Document Information contained herein is proprietary to MtronPTI and is
submitted in confidence. Information may not be copied or divulged without written
permission from MtronPTI.
|