SA0068 Datasheet, PDF (1/4 Pages) MTRONPTI – Specification for a Switched 7 LC Filter Assembly

Specification for a Switched 7 LC Filter Assembly
MtronPTI P/N: SA0068
I. General & Electrical Requirements
Parameter
Minimum Frequency
Cutoff Frequency
Insertion Loss
Rejection @ 2^nd Harmonic
Ultimate Attenuation, Over 1.0GHz to 1.5GHz
Passband Signal Power, CW
Z_S/Z_L, nominal
Band 1
30MHz
43MHz
≤ 1.3dB
≥ 30dB
≥ 50dB
≤ 30W
50Ω
Band 2
43MHz
65MHz
≤ 1.3dB
≥ 30dB
≥ 50dB
≤ 30W
50Ω
Band 3
65MHz
90MHz
≤ 1.3dB
≥ 30dB
≥ 50dB
≤ 30W
50Ω
Additional Parameters:
Switching Time: ≤ 6µsec
II. Environmental & Physical Requirements:
1. Temperature Range
Operating: -40C to +60C
Storage: -45C to +85C
2. DC Power Supply: +100V_DC @ 15mA maximum
3. Package:
Size: Maximum 2.500” (L) x 2.500” (W) x 0.500” (H)
- Excluding RF and Control Pins
- Mounting Method: Thru-Holes for Customer hardware (Ref. Figure 1)
- Package Drawing: Ref. Figure 1
Control Interface:
- Seven (7) control lines
o +100V, @ 15mA maximum, Off State (Reverse Biased)
o -5V, @ 50mA maximum, On State (Forward Biased)
o Only one (1) control line can be forward biased at any time
(i.e.; Break-Before-Make)
Band 4
116MHz
174MHz
≤ 1.3dB
≥ 30dB
≥ 50dB
≤ 30W
50Ω
Band 5
174MHz
220MHz
≤ 1.3dB
≥ 30dB
≥ 50dB
≤ 30W
50Ω
Band 6
220MHz
320MHz
≤ 1.3dB
≥ 30dB
≥ 50dB
≤ 30W
50Ω
Band 7
320MHz
512MHz
≤ 1.3dB
≥ 30dB
≥ 50dB
≤ 30W
50Ω
Figure 1: Package Outline Drawing
Rev. B 03/26/2014
The information contained herein is proprietary to MtronPTI and is submitted in confidence.
This information may not be copied or divulged without the express written permission of MtronPTI
Page 1 of 4