PJ_08 Datasheet, PDF (1/2 Pages) MTRONPTI – Surface Mount Crystals 5.5 x 11.7 x 2.2 mmPARAMETERS

PJ Surface Mount Crystals
5.5 x 11.7 x 2.2 mm
PARAMETERS
Frequency Range*
Tolerance @ +25°C
Stability
Aging
Shunt Capacitance
Load Capacitance
Standard Operating Conditions
Equivalent Series Resistance (ESR), Max.
Fundamental (AT-cut)
3.579 to 3.999 MHz
4.000 to 7.999 MHz
8.000 to 9.999 MHz
10.000 to 19.999 MHz
20.000 to 30.000 MHz
Drive Level
VALUE
3.579545 to 30.000 MHz
See Table
See Table
±5 ppm/yr. Max.
7 pF Max.
18 pF Std.
See Table
200 ȍ
150 ȍ
100 ȍ
80 ȍ
50 ȍ
100 µW Max., 50 µW Typ., 10 µW Min.
Mechanical Shock
Vibration
MIL-STD-202, Method 213, C
MIL-STD-202, Method 201 & 204
Thermal Cycle
MIL-STD-883, Method 1010, B
Max Soldering Conditions
See solder profile, Figure 1
* Because this product is based on AT-strip technology, not all frequencies in the range stated are available.
Contact the factory for availability of specific frequencies.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800.
Revision: 1-2-08