PA2064X1 Datasheet, PDF (1/2 Pages) MTRONPTI – Suitable for all modulations standards

0.8-3.0GHz, 220W Rack Mount Power Amplifier
MtronPTI P/N: PA2064X1 Rack Mount
FEATURES
Rack mounted system
Class AB linear GaN design
Instantaneous wide bandwidth
Suitable for all modulations standards
Built-in protection circuits
High reliability and ruggedness
ELECTRICAL SPECIFICATIONS
Parameter
Operating Frequency Range
Power Output
Power Output @ P1dB
Power Gain
Power Gain Flatness
Input Return Loss
2-Tone Intermodulation (IMD)
Harmonics
Non Harmonics Spurious
Operating Voltage
Power Consumption
Max Input Power
Load VSWR Protection
ENVIRONMENTAL CHARACTERISTICS
Parameter
Operating Ambient Temperature
Storage Temperature
Relative Humidity
MECHANICAL SPECIFICATIONS
Parameter
Dimensions W x H x D
Weight
RF Connectors In / Out
AC Power / Interface Connector
Cooling
OPTIONAL: Digital Monitor & Control
FWD, REV, VSWR, GAIN, ALC, V & I, TEMP
Specification
0.8 - 3.0 GHz
220 Watt Min
200 Watt Min
53 dB Min
4.0 dB p-p Max
10 dB Min
>30 dBc Typ
>20 dBc Typ
60 dBc Min
100 - 240 VAC
1600 Watt Max
+8 dBm
∞:1
Notes
CW
Constant input power
Relative to 50 Ohm
43dBm/Tone, Δ = 1MHz
13dBc Typ below 1.5GHz
At rated Pout
Without damage
Specification
0 to +50 °C
-40 to +85 °C
5 to 95 %
Notes
Non Condensing
Specification
430 x 133 x 560 mm (19 x 5.25 x 22 inches)
20 kg.
Type-N Female
IEC 60320-C14 / 9-Pin D-Sub
Built in Fan Cooling
Ethernet RJ-45 TCP/IP, RS422/485, GPIB
Interface
Notes
3U
Variable speed
Remote Bluetooth application