|
LF9437 Datasheet, PDF (1/2 Pages) MTRONPTI – Specification for a Proposed SMD LC Filter | |||
|
Specification for a Proposed SMD LC Filter
MtronPTI P/N: LF9437
I. General & Electrical Requirements
1. Center Frequency (FON): 93.75MHz
2. Passband @ 2dB: FON ±15MHz minimum
3. Insertion Loss (@ peak of transmission within the 2dB Passband): < 2.0dB
4. Passband Ripple (peak-valley, excluding the 2dB band edge roll-off): ⤠0.5dB
5. VSWR: 1.5:1 maximum
6. Rejection (Relative to Insertion Loss):
DC to 62.5MHz: 70dB minimum
125MHz to 620MHz: 70dB minimum
7. ZIN/ZOUT: 50Ω nominal
II. Environmental & Physical Requirements:
1. Temperature Range
Operating: -45ï°C to +85ï°C
Storage: -50ï°C to +90ï°C
2. Solderability: Per EIAJ-STD-002
3. Package (see Figure 1):
Size: 1.500â (L) x 0.400â (W) x 0.250â (H)
Type: SMD (Ref. Figure 1)
Figure 1: Proposed Outline Drawing
Page 1 of 2
The information contained herein is proprietary to MtronPTI and is submitted in confidence.
This information may not be copied or divulged without the express written permission of MtronPTI
|
▷ |