LF9406 Datasheet, PDF (1/2 Pages) MTRONPTI – Specification for a Bandpass LC Filter

Specification for a Bandpass LC Filter
MtronPTI P/N: LF9406
I. General & Electrical Requirements
1. Center Frequency (F_ON): 3000.0MHz
2. Passband @ 1dBc: 2100MHz minimum (1950MHz to 4050MHz)
3. Insertion Loss (@ F_ON): ≤ 1.3dBa typical
4. Return Loss (Ref to 50Ω, over the 1dBc Passband): ≥ 14dB
5. Rejection (Minimum)
60dBc: DC to 1500MHz
60dBc: 4500MHz to 18000MHz
6. Signal Level: +20dBm CW
7. Z_S/Z_L: 50Ω nominal
II. Environmental & Physical Requirements:
1. Temperature Range
Operating: 0C to +60C
Storage: -65C to +90C
2. Solderability: Per EIAJ-STD-002
3. Package (see Figure 1):
Size: 2.05” (L) x 0.400” (W) x 0.400” (H), including Gull Wing formed leads
Seal: Non-Hermetic, solder sealed
Finish: Silver, Sn63Pb37 (or equivalent) tinned terminals
Figure 1 – Suggested Filter Package Outline Drawing
Rev. A 06/26/12
Page 1 of 2
The information contained herein is proprietary to MtronPTI and is submitted in confidence.
This information may not be copied or divulged without the express written permission of MtronPTI