|
LF9403 Datasheet, PDF (1/2 Pages) MTRONPTI – Specification for an SMD LC Band Reject Filter | |||
|
Specification for an SMD LC Band Reject Filter
MtronPTI P/N: LF9403
I. General & Electrical Requirements
1. Upper Passband Characteristics:
Passband @ 4dB: 20.1MHz to 30.0MHz
Passband @ 6dB: 20.05MHz to 20.1MHz
Return Loss: 10dB minimum
2. Band Reject Characteristics
16dB: 19.0Hz to 19.9MHz
3. Signal Level: +20dBm (CW) with a 2:1 load
4. ZIN/ZOUT: 50Ω nominal
Note: All performance parameters are to be validated at the prototype build.
II. Environmental & Physical Requirements:
1. Temperature Range
Operating: -40ï°C to +85ï°C
Storage: -45ï°C to +90ï°C
2. Vibration: 10g
3. Solderability: Per EIAJ-STD-002
4. Package (see Figure 1):
Size: 2.000â (L) x 0.600â (W) x 0.500â (H)
Figure 1 â Suggested Filter Package Outline & Recommended PAD Layout Drawings
Page 1 of 2
The information contained herein is proprietary to MtronPTI and is submitted in confidence.
This information may not be copied or divulged without the express written permission of MtronPTI
|
▷ |