LF9288 Datasheet, PDF (1/1 Pages) MTRONPTI – SPECIFICATION FOR A SMD BANDPASS LC FILTER

SPECIFICATION FOR A SMD BANDPASS LC FILTER
MtronPTI P/N LF9288
I. GENERAL & ELECTRICAL REQUIREMENTS:
1. CENTER FREQUENCY (F_O): 750.0MHz
2. PASSBAND (@ 2dB): F_O 200MHz
3. INSERTION LOSS (@ peak of transmission from 550MHz thru 950MHz): ≤ 1.0dB
4. PASSBAND RIPPLE: <1.0dB
5. VSWR (from 550MHz thru 950MHz): 2.0:1 or less
6. REJECTION (minimum)
40dB @ <450MHz
40dB @ >1050MHz
7. Z_IN/Z_OUT: 50 Nominal
II. ENIVIRONMENTAL & PHYSICAL REQUIREMENTS:
1. TEMPERATURE RANGE
Operating: -40°C to +85°C
Storage: -55°C to +125°C
2. SOLDERABILITY: Per EIAJ-STD-002
3. SMD PACKAGE: See drawing
DIMENSIONS
Figure 1: LF9288 Outline Drawing
Figure 2: Recommended PAD Layout
Revised: December 10, 2010 Rev. -
Page 1 of 1
Proprietary Document Information contained herein is proprietary to MtronPTI and is
submitted in confidence. Information may not be copied or divulged without written
permission from MtronPTI.