K1570AQG Datasheet, PDF (1/2 Pages) MTRONPTI – 5V Voltage Controlled Crystal Oscillators

! Applications: Phase-Locked Loops (PLL’s); Clock
Recovery; Reference Signal Tracking;
Synthesizers; Frequency Modulation/Demodulation
! 16-pin DIL Package
! 1.0 to 52.0 MHz Frequency Range
! 0.5V to 4.5V Control Voltage
! ±50ppm Stability
! -40°C to 85°C Operating Temperature
K1570AQG Series
5V Voltage Controlled Crystal Oscillators
20,7
mm ^Max.
K14567.C00AT0I0DMAHTZE
CODE
13,08 ^{mm Max.}
7,6 ^{mm Max.}
PIN 1
Model
Frequency Range (MHz)
Input Current (mA)
Frequency Control Function
Deviation (ppm)
Minimum
Maximum
Linearity (%)
Modulation Bandwidth (±3dB)
Nominal Control Voltage (V)
Control Voltage Range (V)
Transfer Function
Input Impedance
Frequency Stability (ppm)
Overall
-40oC to +85oC
Temperature Range (oC)
Operating
Storage
Supply Voltage (V)
Symmetry (%) CMOS/TTL
Start Up Time (ms)
Typical SSB Phase Noise (dBC/Hz)
Offset from Carrier
ELECTRICAL SPECIFICATIONS
K1570AQG
1 to 52
< 26
(For Custom Deviation Range, Vc Range, etc. - Consult Factory)
±100
±200
< 10
> 20KHz
2.5
0.5 to 4.5
Positive
> 50KΩ @ 10KHz
Inclusive of Calibration, Temperature, Voltage, Load and Aging
±50
10Hz
100Hz
1KHz
10KHz
100KHz
-40oC to +85oC
-55oC to +125oC
+5.0V ±5%
40/60
<10
-65
-95
-120
-140
-150
PART NUMBERING GUIDE
K1570AQG - Specify Frequency
2553 N. Edgington Street, Franklin Park, IL 60131 " Phone: [phone] " Fax: [phone]
800-888-1499 or www.champtech.com
1