K1570AQA Datasheet, PDF (1/2 Pages) MTRONPTI – 5V Voltage Controlled Crystal Oscillators

K1570AQA Series
Œ Applications: Phase-Locked Loops (PLL’s); Clock
Recovery; Reference Signal Tracking;
Synthesizers; Frequency Modulation/Demodulation
Π14-pin DIL Package
Π1.0 to 52.0 MHz Frequency Range
Π0.5V to 4.5V Control Voltage
Œ ±25ppm Stability
Œ -40°C to 85°C Operating Temperature
ΠGull Wing
5V Voltage Controlled Crystal Oscillators
20.7 ^{mm Max.}
K11C55.773106A09M _8Q3HA4Z
13.08 ^{mm Max.}
7.6 ^{mm Max.}
V
C
X
LEAD #1
O
ELECTRICAL SPECIFICATIONS
Model
Frequency Range (MHz)
Input Current (mA)
Frequency Control Function
Deviation (ppm)
Minimum
Maximum
Linearity (%)
Modulation Bandwidth (±3dB)
Nominal Control Voltage (V)
Control Voltage Range (V)
Transfer Function
Input Impedance
Frequency Stability (ppm)
Overall
0oC to +70oC
-40oC to +85oC
Temperature Range (oC)
Operating
Storage
Supply Voltage (V)
Symmetry (%) CMOS/TTL
Start Up Time (ms)
Typical SSB Phase Noise (dBC/Hz)
Offset from Carrier
K1570AQA
1 to 52
< 26
(For Custom Deviation Range, Vc Range, etc. - Consult Factory)
±100
±150
< 10
> 20KHz
2.5
0.5 to 4.5
Positive
> 50KΩ @ 10KHz
Inclusive of Calibration, Temperature, Voltage, Load and Aging
±25
±50
10Hz
100Hz
1KHz
10KHz
100KHz
-40oC to +85oC
-55oC to +125oC
+5.0V ±5%
40/60
<10
-65
-95
-120
-140
-150
PART NUMBERING GUIDE
K1570AQA X - Specify Frequency
“Blank” = 0°C to 70°C Operating Temp.
“M” = -40°C to +85°C Operating Temp. (±50ppm only)
2553 N. Edgington Street, Franklin Park, IL 60131 y Phone: [phone] y Fax: [phone]
800-888-1499 or www.champtech.com
53