K1527A Datasheet, PDF (1/2 Pages) MTRONPTI – 5V Voltage Controlled Crystal Oscillators

K1527A Series
! Applications: Phase-Locked Loops (PLL’s); Clock
Recovery; Reference Signal Tracking;
Synthesizers; Frequency Modulation/Demodulation
! 2.0 to 33.0 & 51.840MHz Frequency Range
! Dual Polarity Control Voltage
! -5.0V to 5.0V Control Voltage
! ±20ppm Stability
! Variety of Deviation Sensitivity Options
! -40°C to 85°C Operating Temperature Available
5V Voltage Controlled Crystal Oscillators
20,8_K^m₁₃₅^m_32.7C^M _0AT0^a_0I ^x_DM^._{AHTZE CODE}
13,2 ^{mm Max.}
6,22 ^{mm Max.}
PIN 1
*K1527AC (Height) = 7.49mm Max
ELECTRICAL SPECIFICATIONS
Model
Frequency Range (MHz)
Input Current (mA)
Frequency Control Function
Deviation (ppm)
Minimum
Maximum
Deviation Sensitivity (ppm/V)
Linearity (%)
Modulation Bandwidth (±3dB)
Nominal Control Voltage (V)
Control Voltage Range (V)
Transfer Function
Input Impedance
Frequency Stability (ppm)
Overall
0oC to +70oC
-40oC to +85oC
Temperature Range (oC)
Operating
Storage
Supply Voltage (V)
Symmetry (%) TTL
Symmetry (%) CMOS
Start Up Time (ms)
Typical SSB Phase Noise (dBC/Hz)
Offset from Carrier
K1527AA
K1527AC
2 to 33
51.840
<26
<50
(For Custom Deviation Range, Vc Range, etc. - Consult Factory)
±130
±200
26 to 40
<5
> 30KHz
2.5
-5.0 to +5.0
Positive
> 50KΩ @ 10KHz
±115
±175
23 to 35
<15
> 20KHz
Inclusive of Calibration, Temperature, Voltage, Load and Aging
±45
±20
±60
±35
-40oC to +85oC
-40oC to +125oC
+5.0V ±5%
45/55
<33MHz 45/55; ≥33MHz 40/60
<10
10Hz
-65
100Hz
-95
1KHz
-120
10KHz
-140
100KHz
-150
PART NUMBERING GUIDE
K1527AX X - Specify Frequency
“Blank” = 0°C to 70°C Operating Temp.
“M” = -40°C to +85°C Operating Temp.
Model Selection: See Table Above
2553 N. Edgington Street, Franklin Park, IL 60131 " Phone: [phone] " Fax: [phone]
800-888-1499 or www.champtech.com
1