9429R Datasheet, PDF (1/2 Pages) MTRONPTI – Specification for a Combline Bandpass Filter

Specification for a Combline Bandpass Filter
MtronPTI P/N: 9429R
I. General & Electrical Requirements:
1. Center Frequency (F_O): 1621.25MHz
2. 1dB Bandwidth: 10.5MHz minimum (1616.0MHz to 1626.5MHz)
3. Insertion Loss (@ F_O): 1.0dB maximum
4. Return Loss (within 1616.0MHz to 1626.5MHz): 14.0dB minimum
5. Attenuation (ref. to IL @ F_O)
DC to 1559.0MHz: 55dB minimum
1559MHz to 1585MHz: 36dB minimum
1585.0MHz to 1605.0MHz: 18dB minimum
1666MHz to 2500MHz: 28dB minimum
6. Operating Power Level: ≤ +30dBm (1-watt) CW, 10-watts peak (10% duty cycle)
7. Z_IN/Z_OUT: 50 nominal
II. Environmental & Physical Requirements:
1. Temperature Range:
Operating: -40°C to +85°C
Storage: -55°C to +95°C
2. Shock: Per MIL-STD-810(G), Method 516.6, Procedure VI
3. Vibration: Per MIL-STD-810(G), Method 514.6, Category 9
4. Altitude: Operational to 40,000 feet
5. Package:
Size: 2.800” (L) x 2.500” (W) x 1.000” (H)
Excluding connectors and tuning screws (See Drawing)
Connectors: Right Angle SMA-Female (2 places)
Materials:
Filter Body: Machined aluminum
Filter Finish: Silver Plated. Per ASTM B 700/MIL-C-26074, 0.2 to 0.3 mil Electroless Ni, 0.3minimum Silver plate
Weight: < 9-ounces
Page 1 of 2
The information contained herein is proprietary to MtronPTI and is submitted in confidence.
This information may not be copied or divulged without the express written permission of MtronPTI