9075 Datasheet, PDF (1/1 Pages) MTRONPTI – 200-Watt Lowpass LC Filter

Model 9075
200-Watt Lowpass LC Filter
Electrical Specifications
Corner Frequency
@ 0.5dB: 22MHz
@ 1.0dB: 25MHz
Passband Insertion Loss
≤ 0.5 dB from 1.5MHz to 22MHz
≤ 1.0 dB from 22MHz to 25MHz
Rejection: ≥ 40dB @ 30MHz
Ultimate Attenuation: ≥ 60dB from 35MHz to 90MHz
(Note: The Ultimate Attenuation shall be ≥ 60dB with
VSWR up to 10: 1 on the filter output)
Return Loss
≥ 16dB from 1.5MHz to 5MHz
≥ 20dB from 5MHz to 25MHz
Power Handling: ≥ 200-W_RMS, including the transition
band 25MHz – 30MHz
Z_IN/Z_OUT: 50Ω nominal
Package
Dimensions: Per Drawing
I/O Connectors: Coaxial ‘N’ Female Center Pin
Weight: ≤ 2.5Lbs
Environmental
Temperature Range
Operating: -40°C to +60°C
Storage: -45°C to +85°C
Altitude: Per MIL-STD-810, Method 500.3, Procedure
I, II, and III. Test Altitude for Procedure III is
4570-meters @ 57.2kPa
Humidity: Per MIL-STD-810, Method 507.3,
Procedure III
Salt Fog: Per MIL-STD-810, Method 509.3,
Procedure I
Leakage (Immersion): Per MIL-STD-810, Method
512.3, Procedure I, 2-hours @ 1-meter
Vibration: Per MIL-STD-810, Method 514.4,
Categories 1, 3 and 8 (Table 514.4-AIII)
Shock: Per MIL-STD-810, Method 516.4, Procedure I,
V, and VI
Thermal Shock: Per MIL-STD-810, Method 503.3,
Low Temperature -51°C and High
Temperature +48°C
Solar Radiation: Per MIL-STD-810, Method 505.3,
Procedure I, Hot-Dry Temperature
Conditions (Table 505.3-1)
Rain: Per MIL-STD-810, Method 506.3, Procedure I
Ice and Freezing Rain: Per MIL-STD-810,
Method 521.1
Revised: April 22, 2010
The information contained herein is proprietary to MtronPTI and is submitted in confidence.
This information may not be copied or divulged without the express written permission of MtronPTI
MtronPTI, Inc. - 2525 Shader Road – Orlando – Florida – 32804-2780
Telephone: [phone] Fax: [phone] E-mail: [e-mail]