6880-010 Datasheet, PDF (1/2 Pages) MTRONPTI – Specification for a 2-Pole Spectrum Cleanup Crystal Filter

Specification for a 2-Pole Spectrum Cleanup Crystal Filter
MtronPTI P/N: 6880-010
I. General & Electrical Requirements
1. Center Frequency (F_ON): 100.0MHz
2. 3dB Passband: ≤ F_ON 7.5kHz
3. Insertion Loss (@ peak of transmission within the 3dB passband): ≤ 6dB
4. Passband Ripple (peak-valley): ≤ 1.0dB
5. Rejection (Minimum, Relative to Insertion Loss)
15dB: ≤ F_ON 37.5kHz
6. Ultimate Attenuation: 25dB minimum
7. Spurious Response: -15dB minimum @ F_ON +35kHz to F_ON +500kHz
8. Input Signal Level: ≤ +5dBm
9. Z_IN/Z_OUT: 1450Ω // -1pF ±2pF (Reference Figure 2 for Suggested 50Ω Matching Circuit)
II. Environmental & Physical Requirements:
1. Temperature Range
Operating: 0C to +75C
Storage: -45C to +90C
2. Solderability: Per EIAJ-STD-002
3. Package: Reference Drawing Figure 1
Figure 1 – 6880-010 Package Outline Drawing
Rev. - 11/30/11
Page 1 of 2
The information contained herein is proprietary to MtronPTI and is submitted in confidence.
This information may not be copied or divulged without the express written permission of MtronPTI