5921RH Datasheet, PDF (7/7 Pages) M.S. Kennedy Corporation – RAD TOLERANT ULTRA LOW DROPOUT ADJUSTABLE POSITIVE LINEAR REGULATOR

MECHANICAL SPECIFICATIONS
WEIGHT=7.7 GRAMS TYPICAL
ALL DIMENSIONS ARE ±0.010 INCHES UNLESS OTHERWISE LABELED.
ESD Triangle indicates pin 1.
ORDERING INFORMATION
MSK5921 K RH U
LEAD CONFIGURATIONS
S= STRAIGHT; U= BENT UP; D= BENT DOWN
RADIATION HARDENED
SCREENING
BLANK= INDUSTRIAL; E=EXTENDED RELIABILITY
H=MIL-PRF-38534 CLASS H; K= MIL-PRF-38534 CLASS K
GENERAL PART NUMBER
The above example is an adjustable Class K regulator with leads bent up.
NOTE: See DSCC SMD 5962-05220 for DSCC part number options.
M.S. Kennedy Corp.
4707 Dey Road, Liverpool, New York 13088
Phone [phone]
FAX [phone]
www.mskennedy.com
The information contained herein is believed to be accurate at the time of printing. MSK reserves the right to make
changes to its products or specifications without notice, however, and assumes no liability for the use of its products.
Please visit our website for the most recent revision of this datasheet.
Contact MSK for MIL PRF 38534 Class H, Class K and Appendix G (radiation) status.
7
Rev. B 11/05