MSK4204HRHU Datasheet, PDF (6/6 Pages) M.S. Kennedy Corporation – 100 VOLT 10 AMP RAD-HARD H-BRIDGE PWM MOTOR DRIVER/AMPLIFIER

MECHANICAL SPECIFICATIONS
WEIGHT= TBD GRAMS TYPICAL
ESD Triangle indicates Pin 1.
ALL DIMENSIONS ARE ±0.01 INCHES UNLESS OTHERWISE LABELED
ORDERING INFORMATION
MSK4204 H RH U
LEAD CONFIGURATIONS
S= STRAIGHT; U= BENT UP; D= BENT DOWN
RADIATION HARDENED
SCREENING
BLANK= INDUSTRIAL; E=EXTENDED RELIABILITY
H=MIL-PRF-38534 CLASS H; K= MIL-PRF-38534 CLASS K
GENERAL PART NUMBER
The above example is a Military grade class H hybrid with leads bent up.
M.S. Kennedy Corp.
4707 Dey Road, Liverpool, N.Y. 13088
Phone [phone]
FAX [phone]
www.mskennedy.com
The information contained herein is believed to be accurate at the time of printing. MSK reserves the right to make
changes to its products or specifications without notice, however, and assumes no liability for the use of its products.
Please visit our website for the most recent revision of this datasheet.
Contact MSK for MIL-PRF-38534 Class H, Class K and Appendix G (radiation) status.
6
PRELIMINARY Rev. - 10/05