MSK4203_15 Datasheet, PDF (5/5 Pages) M.S. Kennedy Corporation – 75 Volt, 10 Amp Capability

MECHANICAL SPECIFICATIONS
ESD Triangle indicates Pin 1.
WEIGHT=24.5 GRAMS TYPICAL
ALL DIMENSIONS ARE ±0.01 INCHES UNLESS OTHERWISE LABELED
MSK4203 H U
ORDERING INFORMATION
LEAD CONFIGURATIONS
S= STRAIGHT; U= BENT UP; D= BENT DOWN
SCREENING
BLANK= INDUSTRIAL; E=EXTENDED RELIABILITY
H=MIL-PRF-38534 CLASS H
GENERAL PART NUMBER
The above example is a Military grade class H hybrid with leads bent up.
M.S. Kennedy Corp.
4707 Dey Road, Liverpool, N.Y. 13088
Phone [phone]
FAX [phone]
www.mskennedy.com
The information contained herein is believed to be accurate at the time of printing. MSK reserves the right to make
changes to its products or specifications without notice, however, and assumes no liability for the use of its products.
Please visit our website for the most recent revision of this datasheet.
Contact MSK for MIL-PRF-38534 qualification status.
5
Rev. C 8/09