MSK5251-12 Datasheet, PDF (2/6 Pages) M.S. Kennedy Corporation – Ultra-Fast Transient Response

ABSOLUTE MAXIMUM RATINGS ⁹
VIN
Input Voltage
+6.5V
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
PD Power Dissipation
Internally Limited
○
○
○
○
○
○
○
TST Storage Temperature Range . . . . -65°C to +150°C
TLD Lead Temperature
(10 Seconds Soldering) . . . . . . . . . . . . . . . . 300°C
TJ Operating Temperature
MSK5251 Series . . . . . . . . . -40°C to +85°C
MSK5251H Series . . . . . . . -55°C to +125°C
ELECTRICAL SPECIFICATIONS
PART
NUMBER
OUTPUT
VOLTAGE
7
MSK5251-0.8
+0.8V
MSK5251-0.9
+0.9V
MSK5251-1.0
+1.0V
MSK5251-1.2
+1.2V
NOTES:
MSK5251-1.3
+1.3V
1 Output decoupled to ground using 10μF ceramic capacitor unless otherwise specified.
MSK5251-1.4
+1.4V
2 This parameter is guaranteed by design but need not be tested.
Typical parameters are representative of actual device performance but are for reference only.
MSK5251-1.5
+1.5V
3 All output parameters are tested using a low duty cycle pulse to maintain TJ = TC.
4 Industrial grade devices shall be tested to subgroup 1 unless otherwise specified.
5 Military grade devices ('H' suffix) shall be 100% tested to subgroups 1,2,3.
6 Subgroup 1 TC = +25°C
Subgroup 2 TJ = +125°C
Subgroup 2B TC = +135°C
Subgroup 3 TA = -55°C
7 Please consult the factory if alternate output voltages are required.
8 Due to internal thermal shutdown, maximum output current may not be available at all values of VIN-VOUT and temperatures.
See typical performance curves for clarification.
9 Continuous operation at or above absolute maximum ratings may adversely effect the device performance and/or life cycle.
2
8548-118 Rev. I 4/14