MSK5142-32 Datasheet, PDF (2/9 Pages) M.S. Kennedy Corporation – Fast Transient Response

ABSOLUTE MAXIMUM RATINGS ⁷
IN
IOUT
VIN
TC
Supply Voltage 20V ○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Output Current 3A ○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
Differential Input Voltage ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ 20V
Case Operating Temperature range
MSK5142H ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ -55°C to +125°C
MSK5142 ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ -40°C to +85°C
TST Storage Temperature Range ○ ○ ○ ○ -65°C to +150°C
TLD Lead Temperature Range
(10 Seconds) 300°C ○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
TJ Junction Temperature ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○+150°C
ELECTRICAL SPECIFICATIONS
NOTES:
1 The output is decoupled to ground using a 100μF low ESR tantalum capacitor in parallel with a 1μF ceramic capacitor. See figure 1 for
typical circuit.
2 Guaranteed by design but not tested. Typical parameters are representative of actual device performance but are for reference only.
3 Industrial grade devices shall be tested to subgroups 1 unless otherwise requested.
4 Military grade devices ("H" suffix) shall be 100% tested to subgroups 1,2 and 3.
5 Subgroup 1 TA=+25°C
Subgroup 2 TA=+125°C
Subgroup 3 TA=-55°C
6 Not applicable to versions where VIN + VDROPOUT < VIN min. The minimum input voltage requirement must be maintained.
7 Reference current limit typical performance curves for input to output differential limitations.
8 Continuous operation at or above absolute maximum ratings may adversely effect the device performance and/or life cycle.
2
8548-105 Rev. C 8/14